SMF5.0A_10 Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

SMF5.0A~SMF170A
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
VOLTAGE 5.0 to 170 Volts ^{CURRENT 200 Watts}
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile paceage
• Built-in strain relief
• Low inductance
• High temperature soldering : 260^OC/10 seconds at terminals
• In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DATA
• Case: JEDEC DO-219AB,Molded plastic over passivated junction.
• Terminals: Solderable per MIL-STD-750, Method 2026
• Polarity: Color band denotes positive end (cathode)
• Weight: 0.0006 ounce, 0.0172 gram
• Standrad Packaging : 8mm tape (EIA-481)
1
Cathode
2
Anode
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^OC ambient temperature unless otherwise specified.
Rating
Peak Pulse Power Dissipation on T _A = 25 ^OC (Notes 1,2,5, Fig.1)
Peak Forward Surge Current per (Note 3)
Peak Pulse Current on 10/1000s waveform(Note 1)Fig.2
Steady State Power Dissipation (NOTE 4)
Operating Junction and Storage Temperature Range
Thermal resistance
Symbol
PPPM
IFSM
IPPM
PM(AV)
TJ,TSTG
R_θJA
Value
200
20
see Table 1
1.0
-55 to +150
180
Units
Watts
Amps
Amps
Watts
O_C
O_C
NOTES :
1.Non-repetitive current pulse, per Fig.3 and derated above T_A=25^OC per Fig.2 .
2.Mounted on 5.0mm² copper pads to each terminal.
3.8.3ms single half sine-wave, or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
4.lead temperature at 75^OC =T_L .
5.Peak pulse power waveform is 10/1000μs.
May 04.2010-REV.00
PAGE . 1