PG600R Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER(VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes)

PG600R THRU PG608R
GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIER
VOLTAGE - 50 to 800 Volts CURRENT - 6.0 Amperes
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
l Glass passivated junction in P600 package
l 6 ampere operation at T_A=60 ¢J with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Fast switching for high efficiency
P-600
MECHANICAL DATA
Case: Molded plastic, P600
Terminals: axial leads, solderable per MIL-STD-202,
Method 208
Mounting position: Any
Weight: 0.07 ounce, 2.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
PG600R PG601R PG602R PG604R PG606R PG608R UNITS
Maximum Recurrent Peak Reverse Voltage
50 100 200 400 600 800 V
Maximum RMS Voltage
35
70 140 280 420 560 V
Maximum DC Blocking Voltage
50 100 200 400 600 800 V
Maximum Average Forward Rectified Current
6.0
A
@T_A=60 ¢J
Peak Forward Surge Current 8.3ms single half sine
250
A
wave I_FSM superimposed on rated load(JECEC method)
Maximum Forward Voltage at 6.0A DC
1.3
V
Maximum DC Reverse Current at Rated DC T_a=25 ¢J
5.0
£g A
Blocking Voltage @
T_a=100 ¢J
500
Maximum Reverse Recovery Time(Note 1)
150 150 150 150 250 500 ns
Typical Junction capacitance (Note 2)
Typical Thermal Resistance at 0.375”(9.5mm)” lead
length R £KJA
300
10.0
P^F
¢J /W
Operating and Storage Temperature Range T_A , T_J
-55 to +150
¢J
NOTES:
1. Reverse Recovery Test Conditions: I_F=.5A, I_R=1A, Irr=.25A
2. Measured at 1 MHz and applied reverse voltage of 4.0 volts