PG5391 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)

PG5391 THRU PG5399
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l Glass passivated junction in DO-15 package
l 1.5 ampere operation at T_A=55 ¢J with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
DO-15
MECHANICAL DATA
Case: Molded plastic, DO-15
Terminals: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color Band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
PG5391 PG5392 PG5393 PG5394 PG5395 PG5396 PG5397 PG5398 PG5399 UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 300 400 500 600 800 1000 V
Maximum RMS Voltage
Maximum DC Blocking Voltage
35 70 140 210 280 350 420 560 700 ^V
50 100 200 300 400 500 600 800 1000 ^V
Maximum Average Forward Rectified
1.5
A
Current .375"(9.5mm) lead length
at T_A=55 ¢J
Peak Forward Surge Current, 8.3ms
50
A
single half sine-wave superimposed
on rated load(JEDEC method)
Maximum Forward Voltage at 1.5A
1.4
V
Maximum Reverse Current TA=25 ¢J
5.0
£g A
Rated DC Blocking Voltage TA=100 ¢J
50
£g A
Typical Junction capacitance (Note 1)
25
P^F
Typical Thermal Resistance R £KJA(Note 2)
45.0
¢J /W
Operating and Storage Temperature Range
-55 to +150
¢J
TA
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Thermal resistance from junction to ambient and from junction to lead at 0.375”(9.5mm) lead length P.C.B
mounted