PG4001S Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

PG4001S THRU PG4007S
GLASS PASSIVATED JUNCTION PLASTIC RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l Glass passivated junction version of PG4001S thru
PG4007S in A-405 package
l 1 ampere operation at T_A=75 ¢J with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
A-405
MECHANICAL DATA
Case: Molded plastic, JEDEC A-405
Terminals: Axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color Band denotes cathode
Mounting Position: Any
Weight: 0.008 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
PG4001S PG4002S PG4003S PG4004S PG4005S PG4006S PG4007S
Maximum Recurrent Peak Reverse
Voltage
50
100 200 400 600 800 1000
Maximum RMS Voltage
Maximum DC Blocking Voltage
35
70
140 280 420 560 700
50
100 200 400 600 800 1000
Maximum Forward Voltage at 1.0A
1.1
Maximum Average Forward Rectified
1.0
Current .375" lead length at T_A=75 ¢J
Peak Forward Surge Current, IFM (surge):
30
8.3ms single half sine-wave superimposed
on rated load(JEDEC method)
Maximum Full Load Reverse Current,
30
Full Cycle Average at T_A=75 ¢J
Maximum DC Reverse Current at TA=25 ¢J
5.0
At Rated DC Blocking Voltage TA=100 ¢J
50
Typical Junction capacitance (Note 1)
15
Typical Thermal Resistance R £KJA(Note 2)
50
Operating and Storage Temperature Range
-55 to +150
UNITS
V
V
V
V
A
A
£g A
£g A
£g A
P^F
¢J /W
¢J
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Thermal Resistance Junction to Ambient
* JEDEC Registered Value