P600A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – HIGH CURRENT PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 6.0 Amperes)

P600A THRU P600M
HIGH CURRENT PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 6.0 Amperes
FEATURES
l High surge current capability
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
l Void-free plastic in a P600 package
l High current operation 6.0 Amperes @ T_A=55 ¢J
l Exceeds environmental standards of MIL-S-19500/228
P600
MECHANICAL DATA
Case: Molded plastic, P600
Terminals: axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.07 ounce, 2.1 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
*@ T_A=25 ¢J unless otherwise specified. Single phase, half-wave,60 Hz, resistive or inductive load.
**All values except Maximum RMS Voltage are registered JEDEC parameters.
P600A P600B P600D P600G P600J P600K P600M UNITS
Maximum Recurrent Peak Reverse Voltage
50
Maximum RMS Voltage
35
Maximum DC Blocking Voltage
50
Maximum Average Forward Rectified
Current T_A=55 ¢J
Maximum Overload Surge Current at 1 cycle (NOTE 1)
100 200 400 600 800 1000 V
70 140 280 420 560 700 V
100 200 400 600 800 1000 V
¡C_A
6.0
A
400
A
Maximum Forward Voltage at 6.0 ADC
Maximum DC Reverse Current @T_A=25 ¢J
Rated DC Blocking Voltage @T_A=100 ¢J
Typical Junction capacitance (Note 3) CJ
Typical Thermal Resistance (Note 2) R £KJA
Typical Thermal Resistance (Note 2) R £KJL
Operating Temperature Range
1.0
10
1.0
150
20.0
4.0
-55 to +150
V
£g A
m^ADC
P^F
¢J /W
¢J /W
¢J
Storage Temperature Range
-55 to +150
¢J
NOTES:
1. Peak forward surge current, per 8.3ms single half-sine-wave superimposed on rated load(JECED method)
2. Thermal resistance from junction to ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B.
mounted with 1.1×1.1”(30×30mm) copper pads
3. Measured at 1 MHZ and applied reverse voltage of 4.0 volts