GBP200 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

DATA SHEET
GBP200~GBP2010
IN-LINE GLASS PASSIVATED SINGLE-PHASE BRIDGE RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes
FEATURES
• Plastic material has Underwriters Laboratory
Flammability Classification 94V-O
• Ideal for printed circuit board
• Reliable low cost construction utilizing molded plastic
technique
• Surge overload rating : 60 Amperes peak
C .111 (2.8)
GBP
Unit: inch ( mm )
.581(14.75)
.561(14.25)
.044(1.10)
.031(0.80)
.144(3.65)
.131(3.35)
MECHANICAL DATA
Terminals: Leads solderable per MIL-STD-202,
Method 208
Mounting position: Any
Weight: 0.06 ounce, 1.7 grams
.057(1.45)
.045(1.15)
.160(4.06)
.140(3.56)
.160(4.06)
.140(3.56)
.034(0.86)
.026(0.66)
.160(4.06)
.140(3.56)
.026(0.65)
.013(0.35)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25°Cambient temperature unless otherwise specified. Resistive or inductive load, 60Hz.
For Capacitive load derate current by 20%.
GBP200 GBP201 GBP202 GBP204 GBP206 GBP208 GBP2010 ^UNIT
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Input Voltage
50
100
200
400
600
800
1000
V
35
70
140
280
420
560
700
V
Maximum DC Blocking Voltage
50
100
200
400
600
800
1000
V
Maximum Average Rectified Output Current at 50°C Ambient.
2.0
A
Peak One Cycle Surge Overload Current
60.0
A
Maximum Instantaneous Forward Voltage Drop per Bridge
element at 1.0A dc
1.0
V
Maximum ( Total Bridge) Reverse Leakage at rated T_A=25°
CDc Blocking Voltage per element T_A=100°C
5.0
µA
500
I2t Rating for fusing ( t<8.35ms)
15.0
A²S
Typical junction capacitance per leg (Note 1)
Typical Thermal Resistance per leg (Note 2) RθJA
RθJL
Operating Temperature Range, T_J
25.0
32.0
13.0
-55 to +125
pF
°C / W
°C
Storage Temperature Range,TSTG
-55 to +150
°C
NOTES:
1. Measured at 1.0MHZ and applied reverse voltage of 4.0 volts
2. Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B with 0.47 x 0.47"(12 x 12mm)copper pads.
DATE : SEP.09.2002
PAGE . 1