English
Language : 

ER3A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE- 50 to 600 Volts CURRENT - 3.0 Amperes)
DATA SHEET
ER3A~ER3J
SURFACE MOUNT RECTIFIER
VOLTAGE- 50 to 600 Volts CURRENT - 3.0 Amperes
FEATURES
• For surface mounted applications
• High temperature metallurgically bonded-no compression
contacts as found in other diode-constructed rectifiers
• Glass passivated junction
• Built-in strain relief
• Easy pick and place
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• Complete device submersible temperature of 260°C for 10
seconds in solder bath
MECHANICAL DATA
Case: JEDEC DO-214AB molded plastic
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
Polarity: Indicated by cathode band
Standard packaging: 12mm tape (EIA-481)
Weight: 0.007 ounce, 0.21 gram
SMC / DO-214AB
Unit: inch ( mm )
.280 (7.11)
.260 (6.60)
.012 (.305)
.006 (.152)
.050 (1.27)
.030 (0.76)
.008(.203)
.002(.051)
.320 (8.13)
.305 (7.75)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TL=75°C
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 3.0A
Maximum DC Reverse Current
at Rated DC Blocking Voltage
Maximum Reverse Recovery (Note 1)
TA=25°C
TA=125°C
Typical Junction Capacitance (Note 2)
Maximum Thermal Resistance(Note 3) RθJA
Operating and Storage Temperature Range TJ
ER3A
50
35
50
ER3B
100
70
100
ER3C
150
105
150
ER3D
200
140
200
3.0
ER3E
300
210
300
ER3G
400
280
400
ER3J UNITS
600
V
420
V
600
V
A
0.95
100.0
1.25
5.0
200
35.0
45.0
16
-55 to +150
A
1.70
V
µA
µA
ns
pf
°C/W
°C
NOTES:1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, Irr=0.25A
2. Measured at 1 MHz and applied Vr = 4.0 volts.
3. 8.0 mm2 ( .013mm thick ) land areas.
DATE : SEP.25.2002
PAGE . 1