CP300 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SINGLE-PHASE SILICON BRIDGE-P.C. MTG 2A, HEAT-SINK MTG 3A(VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes)

CP300 THRU CP3010
SINGLE-PHASE SILICON BRIDGE-P.C. MTG 2A, HEAT-SINK MTG 3A
VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes
Recongnized File #E111753
CP-3
FEATURES
l Surge overload rating—50 Amperes peak
l Low forward voltage drop and reverse leakage
l Small size, simple installation
l Plastic package has Underwriter Laboratory
Flammability Classification 94V-O
l Reliable low cost construction utilizing molded
plastic technique
MECHANICAL DATA
Terminals: Leads solderable per MIL-STD-202,
Method 208
Weight: 0.08 ounce, 2.5 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
At 25 ¢J ambient temperature unless otherwise noted; resistive or inductive load at 60Hz.
CP300 CP301 CP302 CP304 CP306 CP308
Max Recurrent Peak Rev Voltage
50 100 200 400 600 800
Max Bridge Input Voltage RMS
35
Max Average Rectified Output at T_C=50 ¢J *
See Fig.2
at T_A=25 ¢J **
Peak One Cycle Surge Overload Current
70 140 280 420 560
3.0
2.0
50
Max Forward Voltage Drop per element at
1.0
1.5A DC & 25 ¢J . See Fig.3
Max Rev Leakage at Rated DC Blocking
Voltage per element at 25 ¢J
See Fig.4
at 100 ¢J
I²t Rating for fusing ( t<8.3ms)
Typical Junction capacitance per leg(Note 4)CJ
Typical Thermal Resistance per leg(Note 2) R £KJA
(Note 3) R £KJL
Operating Temperature Range
10.0
1.0
15.0
21.0
12.0
8.0
-55 TO +125
Storage Temperature Range
-55 TO +150
CP3010 UNITS
1000 V
700
V
A
A
V
£g A
mA
A²Sec
P^F
¢J /W
¢J
¢J
NOTES:
1. Bolt down on heat-sink with silicon thermal compound between bridge and mounting surface for
maximum heat transfer with #6 screw.
2. Unit mounted on 4.0 ¡Ñ 4.0 ¡Ñ 0.11” thick (10.5 ¡Ñ 10.5 ¡Ñ 0.3cm) AL. Plate.
3. Unit mounted on P.C.B at 0.375”(9.5mm) lead length with 0.5 ¡Ñ 0.5” (12 ¡Ñ 12mm) copper pads.
4. Measured at 1 MHz and applied reverse voltage of 4.0 Volts.