2EZ11_04 Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – GLASS PASSIVATED JUNCTION SILICON ZENER DIODES

DATA SHEET
2EZ11~2EZ39
GLASS PASSIVATED JUNCTION SILICON ZENER DIODES
VOLTAGE 11 to 39 Volts
POWER 2.0 Watts
DO-15
FEATURES
• Low profile package
• Built-in strain relief
• Glass passivated iunction
• Low inductance
• Typical I_D less than 1.0µA above 11V
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• Pb free product are available : 99% Sn above meet Rohs environment
substance directive request
MECHANICAL DATA
Case: JEDEC DO-15, Molded plastic over passivated junction
Terminals: Solder plated, solderable per MIL-STD-202G, Method 208
Polarity: Color band denotes positive end (cathode)
Standard packing: 52mm tape
Weight: 0.015 ounce, 0.04 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Pwak Pulse Power Dissipation on TA=50^OC (Notes A)
Derate above 70^OC
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
Operating Junction and Storage Temperature Range
Symbol
PD
IFSM
TJ,TSTG
Unit: inch(mm)
.034(.86)
.028(.71)
.140(3.6)
.104(2.6)
Value
2
24.0
15
-55 to + 150
Units
W atts
mW/ ^OC
Amps
O_C
NOTES:
A.Mounted on 5.0mm2 (.013mm thick) land areas.
B.Measured on8.3ms, and single half sine-wave or equivalent square wave ,duty cycle=4 pulses per minute maximum
STAD-NOV.15.2004
PAGE . 1