1SMB5921 Datasheet, PDF (1/4 Pages) Pan Jit International Inc. – SURFACE MOUNT SILICON ZENER DIODE

DATA SHEET
1SMB5921~1SMB5956
SURFACE MOUNT SILICON ZENER DIODE
VOLTAGE- 6.8 to 200 Volts Power - 1.5 Watts
FEATURES
• For surface mounted applications in order to optimize board space.
• Low profile package
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Typical I_R less than 1.0µA above 12V
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
MECHANICAL DATA
Case: JEDEC DO-214AA,Molded plastic over passivated junction.
Terminals: Solder plated,solderable per MIL-STD-750,
Method 2026
Polarity: Color band denotes positive end (cathode)
Standard Packaging:12mm tape (EIA-481)
Weight: 0.003 ounce, 0.093 gram
SMB / DO-214AA
Unit: inch ( mm )
.185 (4.70)
.160 (4.06)
.012 (.305)
.006 (.152)
.050 (1.27)
.030 (0.76)
.008(.203)
.002(.051)
.220 (5.59)
.200 (5.08)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Pwak Pulse Power Dissipation on TA=70°C (Notes A)
Derate above 70°C
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
Operating and Storage Temperature Range
SYMBOLS
PD
IFSM
VALUE
1.5
15.0
10
TJ, TSTG -55 to +150
UNITS
Watts
mW / °C
Amps
°C
NOTES:
A.Mounted on 5.0mm2 (.013mm thick) land areas.
B.Measured on 8.3ms, and single half sine-wave or equivalent square wave ,duty cycle=4 pulses per minute maximum.
PAGE . 1