|
1SMB5921-AU Datasheet, PDF (1/7 Pages) Pan Jit International Inc. – SURFACE MOUNT SILICON ZENER DIODE | |||
|
1SMB5921-AU~1SMB5942-AU
SURFACE MOUNT SILICON ZENER DIODE
VOLTAGE 6.8 to 51 Volts POWER 1.5 Watts
FEATURES
⢠For surface mounted applications in order to optimize board space.
⢠Low profile package
⢠Built-in strain relief
⢠Glass passivated junction
⢠Low inductance
⢠Typical IR less than 1.0µA above 12V
⢠Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
⢠High temperature soldering : 260°C /10 seconds at terminals
⢠Acqire quality system certificate : TS16949
⢠AEC-Q101 qualified
⢠Lead free in comply with EU RoHS 2002/95/EC directives
MECHANICAL DATA
⢠Case: JEDEC DO-214AA,Molded plastic over passivated junction.
⢠Terminals: Solder plated,solderable per MIL-STD-750, Method 2026
⢠Polarity: Color band denotes cathode end
⢠Standard Packaging:12mm tape (EIA-481)
⢠Weight: 0.0032 ounce, 0.092 gram
0.185(4.70)
0.160(4.06)
0.050(1.27)
0.030(0.76)
0.220(5.59)
0.200(5.08)
0.012(0.305)
0.006(0.152)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Symbol
Peak Pulse Power Dissipation on TL=75 OC (Note A) Derate above 75 OC
PD
Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method)
IF S M
Operating Junction and StorageTemperature Range
TJ , TS TG
Value
1.5
10
-55 to +150
Units
Watts
Amps
OC
NOTES:
A.Mounted on 5.0mm2 (.013mm thick) land areas.
B.Measured on 8.3ms, and single half sine-wave or equivalent square wave ,duty cycle=4 pulses per minute maximum.
STAD-FEB.10.2009
1
PAGE . 1
|
▷ |