1SMA4736_13 Datasheet, PDF (1/7 Pages) Pan Jit International Inc. – SURFACE MOUNT SILICON ZENER DIODE

1SMA4736~1SMA4757
SURFACE MOUNT SILICON ZENER DIODE
VOLTAGE 6.8 to 51 Volts POWER
1 Watts
FEATURES
• For surface mounted applications in order to optimize board space
• Built-in strain relief
• Glass passivated junction
• Low inductance
• Plastic package has Underwriters Laboratory Flammability
Classification 94V-O
• High temperature soldering : 260°C /10 seconds at terminals
• Lead free in comply with EU RoHS 2011/65/EU directives
• Green molding compound as per IEC61249 Std. . (Halogen Free)
MECHANICAL DATA
• Case: JEDEC DO-214AC,Molded plastic over passivated junction.
• Terminals: Solder plated,solderable per MIL-STD-750, Method 2026
• Polarity: Color band denotes cathode end
• Standard Packaging: 12mm tape (EIA-481)
• Weight: 0.0023 ounce, 0.0679 gram
0.181(4.60)
0.157(4.00)
0 012(0 305)
0006(0.152)
0.060(1.52)
0.030(0.76)
0.008(0.203)
0.002(0.051)
0.208(5.28)
0.188(4.80)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
Parameter
Peak Pulse Power Dissipation on T_A=50^OC (Notes A)
Derate above 50 ^OC
Peak Forward Surge Current 8.3ms single half sine-wave
superimposed on rated load (JEDEC method)
Operating Junction and Storage Temperature Range
Symbol
PD
IFSM
TJ,TSTG
Value
1.0
10
-55 to + 150
Units
W atts
Amps
O_C
NOTES:
A. Mounted on 5.0mm2 (.013mm thick) land areas.
B. Measured on8.3ms, and single half sine-wave or equivalent square wave ,duty cycle=4 pulses per minute maximum.
C. Tolerance and Type Number Designation. The type numbers listed have a standard tolerance on the nominal zener
voltage of ± 5%.
December 4,2012-REV.07
PAGE . 1