1N5400 Datasheet, PDF (1/2 Pages) Motorola, Inc – STANDARD RECOVERY RECTIFIERS 50-1000 VOLTS 3.0 AMPERE

1N5400 THRU 1N5408
HIGH CURRENT PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 3.0 Amperes
FEATURES
l High current capability
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l Exceeds environmental standards of MIL-S-19500/228
l Low leakage
DO-201AD
MECHANICAL DATA
Case: Molded plastic , DO-201AD
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.04 ounce, 1.1 grams
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N5400 1N5401 1N5402 1N5403 1N5404 1N5405 1N5406 1N5407 1N5408 _UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 300 400 500 600 800 1000 V
Maximum RMS Voltage
35 70 140 210 280 350 420 560 700 V
Maximum DC Blocking Voltage
50 100 200 300 400 500 600 800 1000 V
Maximum Average Forward Rectified
3.0
A
Current .375"(9.5mm) Lead Length at
T_A=55 ¢J
Peak Forward Surge Current 8.3ms single
200
A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Instantaneous Forward Voltage at
1.2
V
3.0A DC
Maximum Reverse Current T_A=25 ¢J
at Rated DC Blocking Voltage T_A=100 ¢J
5.0
£g A
1000
£g A
Maximum Full Load Reverse Current Full
0.5
mA
Cycle Average 5"(12.5mm)lead length at
T_L=105 ¢J
Typical Junction capacitance (Note 1)
30
Typical Thermal Resistance (Note 2) R £KJA
20.0
P^F
¢J /W
Operating and Storage Temperature Range
-55 TO +150
¢J
T_J,T_STG
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 volts.
2. Thermal Resistance Junction to Ambient at 0.375"(9.5mm) lead length, P.C.B. mounted with
0.8×0.8"(20×20mm) copper heatsinks.