1N5391 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes)

1N5391 THRU 1N5399
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.5 Amperes
FEATURES
l Low cost
l High current capability
l High reliability
l Plastic package has Underwriters Laboratory
Flammability Classification 94V-O utilizing
Flame Retardant Epoxy Molding Compound
l 1.5 ampere operation at T_L=70 ¢J with no thermal runaway
l Exceeds environmental standards of MIL-S-19500/228
l Low leakage
DO-15
MECHANICAL DATA
Case: Molded plastic , DO-15
Terminals: Plated axial leads, solderable per MIL-STD-202,
Method 208
Polarity: Color band denotes cathode
Mounting Position: Any
Weight: 0.015 ounce, 0.4 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N5391 1N5392 1N5393 1N5394 1N5395 1N5396 1N5397 1N5398 1N5399 _UNITS
Maximum Recurrent Peak Reverse Voltage ^{50 100 200 300 400 500 600 800 1000} V
Maximum RMS Voltage
35
70 140 210 280 350 420 560 700
V
Maximum DC Blocking Voltage
50
100 200 300 400 500 600 800 1000
V
Maximum Average Forward Rectified
1.5
A
Current .375"(9.5mm) Lead Length at
T_A=60 ¢J
Peak Forward Surge Current 8.3ms single
50
A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.5A
1.4
V
Maximum Reverse Current Rated T_A=25 ¢J
5.0
£g A
DC Blocking Voltage T_A=100 ¢J
500
£g A
Typical Junction capacitance (Note 1)
Typical Thermal Resistance (Note 2)
25
26.0
P^F
¢J /W
Operating and Storage Temperature Range
-55 TO +150
¢J
T_J,T_STG
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.Board
mounted.