1N4001S Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

1N4001S THRU 1N4007S
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l Low forward voltage drop
l High current capability
l High reliability
l High surge current capability
l £r 0.6mm leads
l Exceeds environmental standards of MIL-S-19500/228
A-405
MECHANICAL DATA
Case: Molded plastic , A-405
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.008 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N4001S 1N4002S 1N4003S 1N4004S 1N4005S 1N4006S 1N4007S _UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
35
75
140 280 420 560 700
V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current @T_A=75 ¢J
1.0
A
Peak Forward Surge Current 8.3ms single
30
A
half sine-wave I_FSM superimposed on rated
load
Maximum Forward Voltage at 1.0A DC
1.1
V
Maximum DC Reverse Current @T_A=25 ¢J
5.0
£g A
At Rated DC Blocking Voltage @T_A=100 ¢J
500
£g A
Typical Junction capacitance (Note 1)
15
Typical Thermal Resistance (Note 2) R £KJA
50
P^F
¢J /W
Typical Thermal resistance (NOTE 2) R £K
25
¢J /W
JL
Operating Temperature Range T_J
-55 to +150
¢J
Storage Temperature Range T_A
-55 to +150
¢J
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Thermal resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted