1N4001 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – PLASTIC SILICON RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere)

1N4001 THRU 1N4007
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l Low forward voltage drop
l High current capability
l High reliability
l High surge current capability
l Exceeds environmental standards of MIL-S-19500/228
DO-41
MECHANICAL DATA
Case: Molded plastic , DO-41
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.012 ounce, 0.3 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ¢J ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N4001 1N4002 1N4003 1N4004 1N4005 1N4006 1N4007 UNITS
Maximum Recurrent Peak Reverse Voltage 50 100 200 400 600 800 1000 V
Maximum RMS Voltage
35
75
140 280 420 560 700
V
Maximum DC Blocking Voltage
50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
1.0
A
Current .375"(9.5mm) Lead Length at
T_A=75 ¢J
Peak Forward Surge Current 8.3ms single
30
A
half sine-wave superimposed on rated load
(JEDEC method)
Maximum Forward Voltage at 1.0A DC and
1.1
V
25 ¢J
Maximum Full Load Reverse Current Full
Cycle Average at 75 ¢J Ambient
30
£g A
Maximum Reverse Current at T_A=25 ¢J
At Rated DC Blocking Voltage T_A=100 ¢J
5.0
£g A
500
£g A
Typical Junction capacitance (Note 1)
15
Typical Thermal Resistance (Note 2) R £KJA
50
P^F
¢J /W
Typical Thermal resistance (NOTE 2) R £K
25
¢J /W
JL
Operating and Storage Temperature Range
-55 to +150
¢J
T_J,T_STG
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Thermal Resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B
mounted.