NC1WH6 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – Bench Mount Wiring Duct Cutting Tool

PANDUCT ^® Bench Mount Wiring Duct Cutting Tool
®
SPECIFICATION SHEET
specifications
The wiring duct cutter shall smoothly cut slotted
plastic wiring duct and duct cover leaving a
square, clean edge. The tool shall cut precisely
and evenly in a single stroke with minimal force
eliminating uneven cuts or burrs. The adjustable
stop with integrated measuring scale shall
provide precision adjustment up to 39.4 inches
(1000mm) to guarantee both wiring duct and
cover are cut to exact lengths.
technical information
Material:
Steel
Weight:
44 lbs./20 kg
Color:
Black
Compatibility:
Cuts PANDUCT ^® Slotted Wiring Duct from .5" x .5" to 4" x 5"
(12mm x 12mm to 100mm x 125mm); covers to 4" (100mm)
key features and benefits
Manual hand operation
Precision cutting blade
Integrated measuring scale
Adjustable cut-length stop
Safety cover
No chips, dust, or noise when compared to power
cutting tools
No burrs or uneven cuts
Reduces waste due to inaccurate cuts
Accurate measurement and consistent cutting of lengths
up to 39.4" (1000mm)
Protects operator from inadvertent contact with blade
applications
The PANDUCT ^® BDCT is a single stroke wiring
duct cutter designed for use in panel shops
to smoothly cut slotted plastic wiring duct
and cover with minimal effort. The cutter’s
powerful lever action cuts precisely and evenly
leaving square, clean edges. This solution
provides accurate cuts to eliminate
time-consuming cutting by hand.
PANDUCT ^® Wiring Duct Cutting Tool
Bench mount
cutting tool:
BDCT
Wiring Duct Bases
(smallest to largest size)
Type G
G.5X.5**6 to
G4X5**6
Type F
F.5X.5**6 to
F4X5**6
Type H
H1.5X2**6 to
H4X4**6
Type MC
MC25X25**2 to
MC100X100**2
Type NE
NE.5X.5WH6 to
NE4X5WH6
Type NNC
NNC25X25**2 to
NNC100X100**2
Type FL
FL12X12LG-A to
FL50X50LG-A
Covers
For Type G,
Type F
C.5**6 to C4**6
For Type H
HC1.5**6 to
HC4**6
For Type NE
NC.5WH6 to
NC4WH6
For Type NNC
NC25**2 to
NC100**2
Installation Tools
Duct
cutting tool:
DCT
Duct
notching tool
(hand-held tool): DNT-100
Duct finger
cutting tool:
DFCT
Nylon rivet tool: TNR
Nylon rivets:
NR1-C
NR1-M
** = Color code of LG (Light Gray), WH (White),
BL (Black), IB (Intrinsic Blue)
www.panduit.com