FXB10A-NM1 Datasheet, PDF (1/3 Pages) PANDUIT CORP. – Keyed LC Opti-Core Patch Cords and Pigtails - Riser (OFNR) and Plenum (OFNP) Rated

Keyed LC Opti-Core^® Patch Cords and Pigtails –
Riser (OFNR) and Plenum (OFNP) Rated
specifications
Keyed LC fiber optic patch cords shall include simplex or duplex
keyed LC connectors on both ends, or on one end with non-keyed
LC or SC connectors on the other end. Keyed LC fiber optic
pigtails shall include simplex or duplex keyed LC connectors on
one end and open (unterminated) on the other end. Keyed LC
connectors shall be mechanically keyed with color-specific
positive and negative keying features to prevent unintentional
mating with unlike keyed or non-keyed adapters. Patch cords
and pigtails shall include laser optimized OM3 fiber, OM2,
OM1 and OS1/OS2 fiber inside 900µm tight-buffered fiber or
1.6mm simplex or duplex zip-cord jacketed cable. Jacketed
cable shall be compliant with UL1666 (OFNR) or NFPA 262
(OFNP) flame ratings. Patch cords and pigtails shall be
RoHS compliant and shall meet or exceed requirements of
TIA/EIA-568-B.3. The fiber connectors shall exceed the
requirements of TIA/EIA-455-21A for 500 mating cycles.
technical information
Standards requirements
Fiber optic connectors:
Patch cords and pigtails:
Insertion loss:
Return loss:
Exceed TIA/EIA-568-B.3 performance requirements
Exceed TIA/EIA-455-21A: 500 mating cycles
Compliant with TIA/EIA-568-B.3, IEC-61754-7 (International), and
UL1666 (OFNR) or NFPA 262 (OFNP) flame ratings
Per connection:
0.10dB typical, 0.30dB max. (multimode);
0.25dB typical, 0.35dB max. (LC singlemode),
0.25dB typical, 0.75dB max. (SC singlemode)
20dB min. (multimode); 26dB min. (10Gig^™ multimode); 55dB min. (singlemode)
key features and benefits
Color-specific keys with
positive and negative
keying features
Mechanically and visually distinguish connections to prevent unintentional
insertion into unlike keyed or non-keyed ports, allow network design flexibility
and versatility, and accommodate more discrete networks
Factory terminated and 100% Assures high performance for increased up-time and lower cost of ownership
tested for insertion loss (all)
and return loss (10Gig ^™ and SM)
Riser or plenum rated jacket
Meets UL1666 (OFNR) or NFPA 262 (OFNP) flame ratings for standard
compliant safety
Singlemode endfaces UPC
Ensure a high quality endface for higher return loss to meet
polished (55dB min. return loss) application requirements
Singlemode endface geometry Every singlemode endface is inspected in compliance with Telcordia
100% factory inspected
GR-326-CORE, Issue 3 requirements to assure high performance
Certified 10 GbE performance
Keyed LC 10Gig^™ Patch Cords and Pigtails are tested per IEEE 802.3ae
10 GbE to support network transmission speeds up to 10 Gb/s for link
lengths up to 300 meters at 850nm to assure high performance and reliability
Test data supplied with
each patch cord and pigtail
Establishes a performance reference to streamline maintenance
and troubleshooting
Universal reference cords
Facilitate network testing and troubleshooting for simplified link validation
(eliminates the need for multiple key-specific reference cords)
applications
Keyed LC Opti-Core ^® Fiber Optic Patch Cords and
Pigtails enable fiber to the desk (FTTD), interconnect
and cross-connect of applications for the specialized
infrastructure design that is required for secure
networks. The primary application for Keyed LC
Opti-Core ^® Fiber Optic Patch Cords and Pigtails is
FTTD deployments that require a level of visual and
mechanical differentiation, and physical layer security
that conventional connector solutions cannot provide.
www.panduit.com
These riser (OFNR) and plenum (OFNP) rated patch
cords and pigtails support installations that require
flame ratings in specific environments. Keyed LC
Opti-Core ^® Fiber Optic Patch Cords and Pigtails are
available in OM1, OM2, OM3 and OS1/OS2 fiber types
to meet the demands of Gigabit Ethernet, 10 Gigabit
Ethernet and high speed Fibre Channel systems while
maintaining compatibility with Ethernet, Fast Ethernet,
FDDI and ATM.
SPECIFICATION SHEET
Keyed LC Opti-Core ^® Duplex OFNR
Patch Cords (Keyed LC to Keyed LC)
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (dark blue):
F^E10A-10AM‡
F^E10B-10BM‡
F^E10C-10CM‡
F^E10D-10DM‡
F^E10E-10EM‡
F^E10F-10FM‡
Keyed LC Opti-Core ^® Simplex
Pigtails – 900µm Buffered Fiber *
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (dark blue):
F^B10A-NM‡
F^B10B-NM‡
F^B10C-NM‡
F^B10D-NM‡
F^B10E-NM‡
F^B10F-NM‡
Keyed LC Opti-Core ^® Duplex OFNP
Pigtails – 1.6mm Jacketed Cable*
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (dark blue):
F^PE10A-NM‡
F^PE10B-NM‡
F^PE10C-NM‡
F^PE10D-NM‡
F^PE10E-NM‡
F^PE10F-NM‡
Keyed LC Opti-Core ^® Hybrid Duplex
OFNR Patch Cords (Keyed LC to LC)
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (dark blue):
F^E10A-10M‡
F^E10B-10M‡
F^E10C-10M‡
F^E10D-10M‡
F^E10E-10M‡
F^E10F-10M‡
Keyed LC Opti-Core ^® Hybrid Duplex
OFNR Patch Cords (SC to Keyed LC)
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (dark blue):
F^E3-10AM‡
F^E3-10BM‡
F^E3-10CM‡
F^E3-10DM‡
F^E3-10EM‡
F^E3-10FM‡
Keyed LC Mini-Com ^® Duplex Adapter
Modules (Ceramic Split Sleeves)
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (dark blue):
CMDABLLCZ**
CMDBRDLCZ**
CMDCGRLCZ**
CMDDYLLCZ**
CMDEORLCZ**
CMDFDBLCZ**
Keyed LC Opticom ^® Fiber Adapter
Panels (Ceramic Split Sleeves)
Keyed A (black):
Keyed B (red):
Keyed C (green):
Keyed D (yellow):
Keyed E (orange):
Keyed F (dark blue):
FAP6WABLDLCZ
FAP6WBRDDLCZ
FAP6WCGRDLCZ
FAP6WDYLDLCZ
FAP6WEORDLCZ
FAP6WFDBDLCZ
LC Lock-in Duplex Clip
and Duplex Adapter Blockout Device
LC lock-in
duplex clip:
LC duplex adapter
blockout device
FLCCLIW-X
PSL-LCAB
Includes 6 duplex adapters; replace 6 in part
numbers with 8 or 12 for 8 or 12 adapters.
^Substitute for fiber type: 6 = 62.5/125µm OM1,
5 = 50/125µm OM2, X = 10Gig^™ 50/125µm
OM3 or 9 = 9/125µm OS1/OS2.
‡Substitute for length in meters: 1 – 10, 15, 20 or
30. Contact Customer Service for other available
lengths or universal reference patch cords.
*900µm buffered fiber pigtails are not flame rated;
jacketed pigtails listed are plenum (OFNP) rated.
**Substitute for module color: AW for Arctic White,
BL for Black, BU for Blue, EI for Electric Ivory,
or IW for Off White.
12 new additional colors available on back
of spec sheet