F9E10-10M3Y Datasheet, PDF (1/2 Pages) PANDUIT CORP. – Opticom QuickNet Rack Mount Fiber Cassette Enclosures

Opticom ^®QuickNet ^™Rack Mount
Fiber Cassette Enclosures
specifications
The fiber cassette enclosure shall house, organize, manage and
protect fiber optic cable, terminations, splices, connectors and patch
cords. Enclosure shall accommodate all Panduit pre-terminated
MTP* cassettes, fiber adapter panels (FAP) and fiber mount panels
(FMP), and associated trunk cables, connectors and patch cords,
and shall include integral cable management and bend radius
control for transition to vertical cable managers. Fiber optic
enclosure shall be constructed of steel material. Molded front and
rear doors shall be removable for cabling and connector access and
installation. A flat front door shall enable access to fiber without
moving the drawer. Enclosure shall provide full front access with a
drawer that slides out and tilts down regardless of how many
enclosures are stacked together. 1 RU enclosure shall be available
in an open-access version which allows patch cord access from
both top and bottom of the enclosure housing. Enclosure shall have
multiple knockouts for a variety of trunk cable entry points.
technical information
Dimensions:
Mounting:
Accessories:
FCE1U, FCE1UA:
FCE2U:
FCE4U:
1.72"H x 17.6"W x 16.8"D
(43.8mm x 447mm x 426.5mm), 1 RU
3.47"H x 17.6"W x 16.8"D
(88.2mm x 447mm x 426.5mm), 2 RU
6.8"H x 17.6"W x 16.8"D
(172.7mm x 447mm x 426.4mm), 4 RU
Integral mounting flange for installation in 19" wide EIA-310 racks
Mounting hardware and accessory kit with labels included
key features and benefits
Modular design mounts up to 4
Opticom ^® QuickNet ^™Cassettes
or FAPs per RU
Works with all Panduit ^® Opticom ^®
QuickNet ^™ Fiber Optic Cassettes
and Fiber Adapter Panels
Hinged, swing down front door
Slide-out, tilt-down drawer
Integral cable management
New fiber optic splice module
TIA-606-A compatible labeling
Provides higher patch field density in fewer rack units
saving valuable space
Provides versatility and flexibility with a fully modular solution
for a variety of pre-terminated installations, FAP and field
termination, and splicing installations. Works with all Panduit
LC, SC, ST, MT-RJ and MTP* fiber adapter panels and cassettes
Enables access to fiber optic patch cords without needing to move
drawer for easier moves, adds, and changes; enables stacking for
reduced real estate
Offers total front access to all patch cords and rear cables for
in-cabinet and top-of-rack mounting locations
Ensures proper cable routing, bend radius control, and rear slack
storage for all patch cords, interconnect cables, and trunk cables
Can fusion splice up to 96 fibers per RU in a single enclosure with
one-to-one splice-to-patching ratio
Standards-based, mechanically printed labeling of fiber
connectivity, patchfields, and enclosures enables clear
and accurate labeling for easy moves, adds and changes
applications
Opticom ^® QuickNet ^™ Rack Mount Fiber Cassette
Enclosures provide a system for managing fiber
terminations, connections, and patching in all types
of applications. The enclosures are a component of
the Opticom ^® QuickNet^™ Fiber Cabling System. They
are ideal for fast, reliable patch field creation in
cross-connect or inter-connect main distribution
areas (MDA) or horizontal distribution areas (HDA)
for storage area network (SAN) patching. The
enclosure can also serve as a transition point for
pre-terminated MTP* interconnect or trunk cables
patched to active equipment in data center server
cabinets or LAN switch racks. The enclosures
provide high patch field densities with the FCE1U
housing up to 96 fibers in 1 RU, the FCE2U housing
up to 192 fibers in 2 RU, and the FCE4U housing up
to 288 fibers in 4 RU. Integral cable management,
bend radius control, and slack management features
protect fiber optic cables, patch cords, and
connectors to ensure end-to-end signal integrity.
*MTP is a registered trademark of US Conec Ltd.
www.panduit.com
SPECIFICATION SHEET
Opticom ^®QuickNet ^™ Rack Mount
Fiber Cassette Enclosures
1 RU for 4 FAPs or
cassettes:
FCE1U
1 RU for 4 FAPs or
cassettes, open access: FCE1UA
2 RU for 8 FAPs or
cassettes:
FCE2U
4 RU for 12 FAPs or
cassettes:
FCE4U
Opticom ^® QuickNet ^™ Cassettes Optimized
10Gig^™ 50/125µm OM3/OM4 Multimode Fiber
12 duplex LC to 2 MTP*: FCXO-24-10Y
6 duplex LC to 1 MTP*: FCXO-12-10Y
6 duplex SC to 1 MTP*: FCXO-12-3Y
Opticom ^® QuickNet ^™ Cassettes
10Gig^™ 50/125µm OM3/OM4 Multimode Fiber
12 duplex LC to 2 MTP*: FCX-24-10Y
6 duplex LC to 1 MTP*: FCX-12-10Y
6 duplex SC to 1 MTP*: FCX-12-3Y
Opticom ^® QuickNet ^™ Cassettes
50/125µm OM2 Multimode Fiber
12 duplex LC to 2 MTP*: FC5-24-10Y
6 duplex LC to 1 MTP*: FC5-12-10Y
6 duplex SC to 1 MTP*: FC5-12-3Y
Opticom ^® QuickNet ^™ Cassettes
9/125µm OS1 Singlemode Fiber
12 duplex LC to 2 MTP*: FC9-24-10Y
6 duplex LC to 1 MTP*: FC9-12-10Y
6 duplex SC to 1 MTP*: FC9-12-3Y
Opticom ^® Fiber Adapter Panels
12 duplex LC, 10Gig^™:
6 duplex LC, 10Gig^™:
12 duplex LC:
6 duplex LC:
6 duplex SC, 10Gig^™:
3 duplex SC, 10Gig^™:
6 duplex SC:
3 duplex SC:
6 simplex ST:
6 duplex MT-RJ:
FAP12WAQDLC
FAP6WAQDLC
FAP12WEIDLC
FAP6WEIDLC
FAP6WAQDSC
FAP3WAQDSC
FAP6WEIDSC
FAP3WEIDSC
FAP6WST
FMP6WMTRJ
Opti-Core ^® Patch Cords
12 fiber MTP* to MTP*:
Duplex LC to LC:
Duplex SC to SC:
Duplex SC to LC:
F^12D5-5M**Y
F^E10-10M**Y
F^D3-3M**Y
F^D3-10M**Y
Splice Modules and Holders
Splice module (fusion):
Splice module
(mechanical):
Splice module
holder for FCE1U:
Splice module
holder for FCE2U:
Splice module
holder for FCE4U:
FOSMF
FOSMM
FOSMH1U
FOSMH2U
FOSMH4U
Tools and Accessories
Panduit connector
removal tool:
Fiber slack spool 1 RU:
Fiber slack spool 2 RU:
Bend radius clip:
PCRT
FMS1
FMS2
FEBRC
^Substitute for fiber type:
X = (OM3/OM4 – 10Gig^™ 50/125 µm);
5 = (OM2 – 50/125 µm);
6 = (OM1 – 62.5/125 µm);
9 = (OS1 – 9/125 µm)
**Substitute for length in meters; 1, 2, 3, 5 and
10 are standard lengths.
Contact Panduit Customer Service for other
available lengths.