F6D3-3M1 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – SC Fiber Optic Connectors

SC Fiber Optic Connectors
SPECIFICATION SHEET
specifications
SC field polish connectors are TIA/EIA-604 FOCIS-3
compliant. SC simplex and duplex connectors are
field terminable. The fibers shall terminate in 2.5mm
ceramic ferrules with non-optical disconnect
functionality and an average insertion loss of 0.1dB
(multimode) and 0.15dB (singlemode) per mated pair.
technical information
Standards requirements:
Fiber compatibility:
Fiber cable type:
Fiber cable size:
Ferrule type:
Insertion loss:
Return loss:
TIA/EIA-604 FOCIS-3 compliant; exceeds
TIA/EIA-568-B.3 requirements
62.5/125µm OM1, 50/125µm OM2, 10Gig^™ 50/125µm laser
optimized OM3/OM4 and 9/125µm OS1/OS2
900µm tight-buffered cable recommended
3.0mm or 1.6mm – 2.0mm jacketed cable
Zirconia ceramic ferrule
0.1dB average (multimode), 0.15dB (singlemode)
>20dB (multimode), >40dB (singlemode)
key features and benefits
Free floating housing
Pre-assembled inner
inner housing
Full length adhesive
fill tube
Non-optical disconnect
Anaerobic adhesive
field installation
High temperature
thermoplastic design
Simplex available with
900µm and 3.0mm or
1.6 – 2.0mm boots
Standard 2.5mm
ceramic ferrules
Ensures complete latching even when inserted by the boot;
valuable in high-density spacing applications
Fewer parts simplifies assembly and reduces installer error for
lower installed cost
Prevents adhesive from entering internal cavity of connector to
reduce installer error
Maintains data transmission under tensile loads for jacketed
cable for network reliability
Simplifies and reduces installation time by 50% compared to heat
cured epoxy terminations; curing oven/time not required
Allows use of high glass transition temperature epoxies
with cure temperatures up to 150°C (302°F)
One connector part number for both fiber types for easier ordering
and stocking
Provide the highest durability for repeated matings
applications
Panduit SC Fiber Optic Connectors are used for
equipment cross-connects or interconnects in
backbone, horizontal and work area applications.
SC connectors are recommended by
TIA/EIA-568-B.3 at the wall outlet and the
*MTP is a registered trademark of US Conec Ltd.
www.panduit.com
telecommunications closet. Multimode connectors
provide a robust and easy to terminate solution for
lower cost fiber-to-the-desk applications.
Singlemode connectors provide added bandwidth
capacity for data hungry applications.
SC Simplex Fiber Optic Connectors
for 900µm Buffered Fiber and
3.0mm Jacketed Cable
Multimode (black boots): FSCM5BL
Multimode (black boots): FSCMBL
Multimode (red boots): FSCMRD
Singlemode (blue boots): FSCSBU
SC Simplex Fiber Optic Connectors
for 900µm Buffered Fiber and
1.6mm – 2.0mm Jacketed Cable
Multimode (black boots): FSCM2.05BL
Multimode (black boots): FSCM2.0BL
Multimode (red boots): FSCM2.0RD
Singlemode (blue boots): FSCS2.0BU
SC Duplex Fiber Optic Connectors
for 3.0mm Jacketed Cable
Multimode (black boots) FSCDM5BL
Multimode (black/red): FSCDM
SC Fiber Optic Adapters
Duplex MM:
Duplex MM:
Duplex 10Gig ^™ (zirc):
Simplex SM (zirc):
Simplex APC (zirc):
FADSCEI-L
FADSCBL-L
FADSCZAQ-L
FASSCZBU-L
FASSCZAG-L
L = Bag of 50 adapters; 100 per carton.
Mini-Com ^® SC Adapter Modules
Duplex MM:
CMDEISCEI
Duplex MM:
CMDBLSCBL
Duplex 10Gig ^™ (zirc.): CMSBUSCZBU
Simplex SM (zirc): CMSBUSCZBU
Simplex APC (zirc): CMSAGSCZBL
Opticom ^® SC Fiber Adapter Panels
6 duplex MM:
FAP6WEIDSC
6 duplex MM:
FAP6WBLDSC
6 duplex 10Gig ^™:
FAP6WAQDSCZ
6 duplex SM (zirc.): FAP6WBUDSCZ
12 simplex SM (zirc.): FAP12WBUSCZ
Opticom ^® QuickNet ^™ Pre-Terminated
MTP* Cassettes
12 SC to MTP* (12f): FC^-12-3S
6 SC to MTP* (12f): FC^-12-3
Opti-Core ^® Fiber Optic Patch Cords
Duplex SC to SC: F^D3-3M‡
Simplex SC to SC: F^S3-3M‡
Simplex SC to pigtail: F^B3-NM‡
SC Termination Tooling
Termination kit:
FJKITG
Refurbishment kit: FJKITG-RFB
Additional Components for Singlemode
1µm diamond film: FPF1-V
0.05µm lapping film: FLCFPLF-X
HD Connector Removal Tool
For LC and SC:
PCRT1
Substitute for module color:
EI = Electric Ivory
IG = International Gray
TG = Technical Gray
AW = Arctic White
EW = European White
BU = Blue
WH = White
BL = Black
IW = Off White
^Substitute for fiber type:
X (OM3/OM4 – 10Gig ^™ 50/125µm), 5
(OM2 – 50/125µm), 6 (OM1 – 62.5/125µm) or
9 (OS1/OS2 – 9/125µm).
‡Substitute for length in meters: 1, 2, 3, 5 or 10 for
patch cords, and 1, 2 or 3 for pigtails; singlemode
patch cords are also available in 12,15, 25 or 30
meter lengths. Contact Customer Service for other
available lengths.