F5PE3-10M1 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – Opti-Core Fiber Optic Patch Cords and Pigtails - Riser (OFNR) and Plenum (OFNP) Rated

Opti-Core^® Fiber Optic Patch Cords and Pigtails –
Riser (OFNR) and Plenum (OFNP) Rated
specifications
RoHS compliant fiber optic patch cords shall include simplex or
duplex LC, SC, ST or MT-RJ connectors, or FJ or keyed FJ plugs or
jacks on both ends. RoHS compliant fiber optic pigtails shall include
simplex or duplex LC, SC, ST, or MT-RJ connectors, or FJ or keyed
FJ plugs or jacks on one end and open (unterminated) on the other
end. Patch cords and pigtails shall include laser optimized OM4, OM3
fiber or OM2, OM1 or OS1/OS2 fiber in 900µm tight-buffered fiber,
1.6mm or 3.0mm simplex or duplex zipcord jacketed cable, or 1.8mm
duplex zipcord jacketed cable. Jacketed cable shall be compliant with
UL 1666 (OFNR) or NFPA 262 (OFNP) flame ratings. Patch cords
and pigtails shall meet or exceed requirements of TIA/EIA-568-C.3.
The fiber connectors shall be FOCIS compliant or compatible, and
exceed the requirements of TIA/EIA-455-21A for 500 mating cycles.
technical information
Standards
requirements:
Insertion loss:
Return loss:
All connectors exceed TIA/EIA-455-21A: 500 mating cycles
Compliant with: TIA/EIA-568-C.3 and ISO/IEC 11801
IEC-61754-7 (International)
TIA-604-5 (FOCIS-5)
UL 1666 (OFNR) or NFPA 262 (OFNP) flame ratings
Per connection: 0.10dB typical, 0.25db max (OM1, OM2 and Standard OM3, OM4)
0.15db max (optimized OM3 and Optimized OM4) for SC and LC
0.30db max for other connectivity
0.50dB max. (MT-RJ multimode);
0.25dB typical, 0.75dB max. (singlemode),
0.35dB max. (LC singlemode)
20dB min. (multimode); 26dB min. (10Gig ^™ multimode); 55dB min. (singlemode)
key features and benefits
Factory terminated and 100%
tested for insertion loss (all)
and return loss (10Gig ^™ and SM)
Riser or plenum rated jacket
Singlemode endface
geometry 100%
factory inspected
Singlemode endfaces
UPC polished
(55dB min. return loss)
Singlemode patch cords
include low water peak fiber
Certified 10 GbE performance
Test data supplied with each
patch cord and pigtail
Q.C. identification label
Assures high performance for increased up-time and lower cost
of ownership
Meets UL 1666 (OFNR) or NFPA 262 (OFNP) flame ratings for
standard compliant safety
Every singlemode endface is inspected in compliance with Telcordia
GR-326-CORE, Issue 3 requirements to assure high performance
Ensure a high quality endface for higher return loss to meet
application requirements
Eliminates high attenuation in the E-band and allows operation over
the entire 1260nm – 1625nm wavelength range; excellent for CWDM
and DWDM applications
10Gig^™ Patch Cords and Pigtails are tested per IEEE 802.3ae
10 GbE to support network transmission speeds up to 10 Gb/s for
link lengths up to 300m for OM3 and up to 550 meters for OM4
at 850nm to assure high performance and reliability
Establishes a performance reference to streamline maintenance
and troubleshooting
Quality control reference provides lifetime traceability of test data
applications
Opti-Core ^® Fiber Optic Patch Cords and Pigtails
provide interconnect and cross-connect of
applications over installations in entrance facilities,
telecommunications rooms, data centers and at
the desk. They support network applications to
interconnect pre-terminated cassettes in main
distribution, horizontal distribution and equipment
distribution areas. These riser (OFNR) and plenum
(OFNP) rated patch cords and pigtails support
installations that require these flame ratings in
specific environments.
www.panduit.com
Opti-Core ^® Fiber Optic Patch Cords and Pigtails
are available in OM4, OM3 fiber or OM2, OM1 or
OS1/OS2. fiber types to meet the demands of
Gigabit Ethernet, 10 Gigabit Ethernet and high
speed Fibre Channel systems while maintaining
compatibility with Ethernet, Fast Ethernet, FDDI and
ATM. If application requires low smoke
zero halogen (LSZH) rated fiber optic patch
cords, reference Opti-Core ^® Fibre Optic Patch
Cords – Low Smoke Zero Halogen (LSZH).
SPECIFICATION SHEET
Opti-Core ^® Riser (OFNR)*
Fiber Optic Patch Cords
Duplex LC to LC
1.6mm jacketed cable:
Simplex LC to LC
1.6mm jacketed cable:
Duplex SC to SC
3mm jacketed cable:
Simplex SC to SC
3mm jacketed cable:
Duplex ST to ST
3mm jacketed cable:
Simplex ST to ST
3mm jacketed cable:
FJ ^® Plug to FJ ^® Plug
3mm jacketed cable:
Duplex MT-RJ to MT-RJ
1.8mm jacketed cable:
F^E10-10M^‡Y
F^F10-10M^‡Y
F^D3-3M^‡Y
F^S3-3M^‡Y
F^D2-2M^‡Y
F^S2-2M^‡Y
F^D6P-6PM^‡Y
F^Z12-12M^‡
Opti-Core ^® Riser (OFNR)*
Hybrid Fiber Optic Patch Cords
Duplex SC to LC
1.6mm jacketed cable:
Simplex SC to LC
1.6mm jacketed cable:
Duplex ST to LC
1.6mm jacketed cable:
Duplex ST to SC
3mm jacketed cable:
Simplex ST to SC
3mm jacketed cable:
FJ ^® Plug to LC
1.6mm jacketed cable:
FJ ^® Plug to SC
3mm jacketed cable:
FJ ^® Plug to ST
3mm jacketed cable:
Duplex SC to MT-RJ
1.8mm jacketed cable:
Duplex ST to MT-RJ
1.8mm jacketed cable:
FJ ^® Plug to MT-RJ
1.8mm jacketed cable:
F^E3-10M^‡Y
F^F3-10M^‡Y
F^E2-10M^‡Y
F^D2-3M^‡Y
F^S2-3M^‡Y
F^E6P-10M^‡Y
F^D6P-3M^‡Y
F^D6P-2M^‡Y
F^Z3-12M^‡
F^Z2-12M^‡
F^Z6P-12M^‡
Opti-Core ^® Fiber Optic Pigtails **
LC to pigtail
900µm buffered fiber:
SC to pigtail
900µm buffered fiber:
ST to pigtail
900µm buffered fiber:
FJ ^® Jack to pigtail
3mm jacketed cable:
FJ ^® Jack to pigtail
900µm buffered fiber:
F^B10-NM^‡Y
F^B3-NM^‡Y
F^B2-NM^‡Y
F^D6J-NM^‡Y
F^B6J-NM^‡Y
*Part numbers listed are for riser (OFNR) rated cable; for
plenum (OFNP) rated cable, place a P after the fiber type
(^) and drop the Y.
^Substitute for fiber type:
Z = OM4 – 10Gig^™ 50/125µm
ZO = Optimized OM4 – 10Gig 50/125µm
X = OM3 – 10Gig^™ 50/125µm
XO = Optimized OM3 – 10Gig 50/125µm
5 (OM2 – 50/125µm), 6 (OM1 – 62.5/125µm) and
9 (OS1/OS2 – 9/125µm). MT-RJ patch cords are only
available in OM1 or OM2 fiber.
‡_{Substitute for length in meters: Patch cords –}
1m – 10m, 15m, 20m, 25m or 30m; pigtails –
1m, 2m, or 3m. Contact Customer Service for other
available lengths.
**900µm buffered fiber pigtails are not flame rated;
jacketed pigtails listed are for riser
(OFNR) rated cable.