English
Language : 

D-609-12 Datasheet, PDF (1/1 Pages) PANDUIT CORP. – CRIMP SPLICER, STUB, NICKEL PLATED
SPECIFICATION CONTROL DRAWING
Product Rev
CMA Range*
Max Weight Color
Product Name
min max
I.D.
O.D.
Lbs./mpc Code
D-609-12
A 300 1510
1.27 (0.050)
2.03 (0.080)
.30
Red
1.13 (0.045)
1.90 (0.075)
D-609-13
A 779 2680
1.75 (0.069)
2.69 (0.106)
.49
Blue
1.62 (0.064)
2.56 (0.101)
D-609-14
A 1900 6755
2.59 (0.102)
3.89 (0.153)
.99
Yellow
2.46 (0.097)
3.73 (0.147)
* Not all wire combinations falling within the usable CMA range can be accommodated within the splicer barrel.
MATERIAL
1. CRIMP SPLICER: Base Metal - Copper Alloy 101 or 102 per ASTM B 75.
Plating: Ductile Nickel per QQ-N-290.
APPLICATION
1. Parts shall be of seamless tubular construction.
2. Diameters shall be concentric within 0.127 (0.005) T.I.R.
3. Packing and packaging shall be in accordance with Section 5, Level C, of MIL-S-81824.
Tyco Electronics Corporation
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
TITLE:
Raychem
CRIMP SPLICER,
STUB, NICKEL PLATED
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO.: D-609-12/-13/-14
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to amend
this drawing at any time. Users should
evaluate the suitability of the product for their
application.
DATE:
31-Jan.-01
DOC ISSUE:
1
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
N/A
DCR NUMBER:
D010061
PROD. REV.:
SCALE:
SEE TABLE
None
SIZE:
A
SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
© 2004 Tyco Electronics Corporation. All rights reserved