English
Language : 

D-436-85 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – IN-LINE SPLICE SEALING SYSTEM, 2 OR 3 TO 1 SPLICER: Nickel Plated, Color Coded, with Inspection Slots
SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. SINGLE-WIRE SEAL: Low outgassing immersion resistant thermoplastic.
3. THREE-WIRE SEAL: Low outgassing immersion resistant thermoplastic.
4. CRIMP SPLICE: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Nickel per QQ-N-290.
Dimensions:
Part
Prod.
Crimp Splice
Name
Rev. Size
ØB
ØC
D
E
Color Code
D-436-85
A 20 1.27 (0.050) 2.03 (0.080) 12.95 (0.510) 6.22 (0.245)
Red
1.14 (0.045) 1.91 (0.075) 12.45 (0.490) 5.72 (0.225)
D-436-86
B 16 1.75 (0.069) 2.70 (0.106) 14.86 (0.585) 7.11 (0.280)
Blue
1.63 (0.064) 2.57 (0.101) 14.35 (0.565) 6.60 (0.260)
D-436-87
A 12 2.60 (0.102) 3.91 (0.154) 14.86 (0.585) 7.11 (0.280)
Yellow
2.46 (0.097) 3.73 (0.147) 14.35 (0.565) 6.60 (0.260)
Installation Data:
Splicer
Size
Wire Size Range of Crimp Splice
One Wire
Two wires
Three wires
Minimum Maximum Minimum Maximum Minimum Maximum
20
24
20
26
24
28
24
16
20
16
24
20
24
22
12
16
12
22
16
22
18
Tyco Electronics Corporation
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend this
0.00 N/A
drawing at any time. Users should evaluate the
0.0 N/A
ROUGHNESS IN suitability of the product for their application.
0 N/A
MICRON
DRAWN BY:
REPLACES:
DCR NUMBER:
M. FORONDA
N/A
D001297
If this document is printed it becomes uncontrolled. Check for the latest revision.
TITLE :
(Low Outgassing)
IN-LINE SPLICE SEALING SYSTEM,
2 OR 3 TO 1 SPLICER: Nickel Plated,
Color Coded, with Inspection Slots
DOCUMENT NO.: D-436-85/-87
DATE:
05-Dec.-00
DOC ISSUE:
1
PROD. REV.
SEE TABLE
SCALE: SIZE:
None
A
SHEET:
1 of 2