D-436-77 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – STUB SPLICE SEALING SYSTEM MULTI-WIRE

SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. MELTABLE SEALING RINGS: Modified thermoplastic.
3. SEAMLESS STUB SPLICER: Base Metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Nickel per QQ-N-290.
Color code: See table below.
Dimensions of Stub Splicer:
Part
Prod.
Name
Rev. CMA Range*
I.D.
O.D.
Max. Weight Color Code
D-436-77
D
779 - 2680 1.75 (0.069) 2.67 (0.105) 1.65 lbs/Mpc
Blue
1.65 (0.065) 2.57 (0.101)
D-436-78
D 1900 - 6755 2.60 (0.102) 3.89 (0.153) 2.15 lbs/Mpc Yellow
2.49 (0.098) 3.73 (0.147)
* Not all wire combinations falling within the CMA range can be accommodated within the splicer barrel.
For list of some of the usable wire combinations which can be spliced and sealed, see Thermofit Splicing
Table D-436-60/-61.
Tyco Electronics Corporation
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
TITLE :
STUB SPLICE SEALING
SYSTEM MULTI-WIRE
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES: ANGLES: N/A Tyco Electronics reserves the right to amend this
0.00 N/A
drawing at any time. Users should evaluate the
0.0 N/A
ROUGHNESS IN suitability of the product for their application.
0 N/A
MICRON
DRAWN BY:
REPLACES:
DCR NUMBER:
M. FORONDA
N/A
D001300
DOCUMENT NO.: D-436-77/-78
DATE:
05-Dec.-00
DOC ISSUE:
1
PROD. REV.
SCALE:
SEE TABLE None
SIZE:
A
SHEET:
1 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.