D-436-52 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – IN-LINE SPLICE SEALING SYSTEM, 2 OR 3 TO 1 SPLICE: Tin Plated, Color Coded, with Inspection Slots

SPECIFICATION CONTROL DRAWING
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked modified polyvinylidene
flouride.
2. SINGLE-WIRE SEAL: Immersion resistant thermoplastic.
3. THREE-WIRE SEAL: Immersion resistant thermoplastic.
4. CRIMP SPLICE: Base metal: Copper Alloy 101 or 102 per ASTM B-75.
Plating: Tin per MIL-T-10727, Type 1.
Color code: See table below.
Dimensions of Crimp Splice :
Part
Prod.
Name
Rev. Size
D-436-52
C 16
D-436-53
C 12
ØA
2.69 (0.106)
2.56 (0.101)
3.91 (0.154)
3.73 (0.147)
ØB
1.75 (0.069)
1.63 (0.064)
2.59 (0.102)
2.46 (0.097)
Crimp Splice
D
14.86 (0.585)
14.35 (0.565)
14.86 (0.585)
14.35 (0.565)
E
7.11 (0.280)
6.60 (0.260)
7.11 (0.280)
6.60 (0.260)
Color Code
Blue
Yellow
Installation Data:
Splicer
Size
Wire Size Range of Crimp Splice
One Wire
Two wires
Three wires
Minimum Maximum Minimum Maximum Minimum Maximum
16
20
16
24
20
24
22
12
16
12
22
16
22
18
TE Connectivity
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TITLE :
IN-LINE SPLICE SEALING SYSTEM,
2 OR 3 TO 1 SPLICE: Tin Plated,
Color Coded, with Inspection Slots
DOCUMENT NO.: D-436-52/-53
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
15-Apr-11
DRAWN BY:
M. FORONDA
REPLACES:
N/A
DCR NUMBER:
D001302
PROD. REV.
SCALE:
SEE TABLE None
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
DOC ISSUE:
2
SIZE:
A
SHEET:
1 of 2