D-436-36 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – IN-LINE SPLICE SEALING SYSTEM, 1 TO 1 MIL-S-81824/1

SPECIFICATION CONTROL DRAWING
Product Rev
I.D.*
Product Dimensions
Product
a (min)
A
B
C
D
Name
b (max)
D-436-36
A
2.16 (0.085)
1.27 (0.050) 2.03 (0.080) 12.95 (0.510) 6.22 (0.245)
0.64 (0.025)
1.14 (0.045) 1.91 (0.075) 12.45 (0.490) 5.72 (0.225)
D-436-37
A
2.79 (0.110)
1.75 (0.069) 2.69 (0.106) 14.86 (0.585) 7.11 (0.280)
0.64 (0.025)
1.63 (0.064) 2.57 (0.101) 14.35 (0.565) 6.60 (0.260)
D-436-38
A
4.32 (0.170)
2.59 (0.102) 3.89 (0.153) 14.86 (0.585) 7.11 (0.280)
0.64 (0.025)
2.46 (0.097) 3.73 (0.147) 14.35 (0.565) 6.60 (0.260)
* I.D.: a) As received; b) After unrestricted recovery thru meltable insert.
E
max
0.38
(0.015)
0.51
(0.020)
1.27
(0.050)
TE Connectivity
305 Constitution Drive
Menlo Park, CA 94025, USA
Raychem
Products
TITLE:
IN-LINE SPLICE SEALING SYSTEM,
1 TO 1 MIL-S-81824/1
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
TOLERANCES: ANGLES: N/A
TE Connectivity reserves the right to amend this
0.00 N/A
drawing at any time. Users should evaluate the
0.0 N/A
ROUGHNESS IN suitability of the product for their application.
0 N/A
MICRON
DRAWN BY:
REPLACES:
DCR NUMBER:
M. FORONDA
N/A
D000566
DOCUMENT NO.: D-436-36/-37/-38
DATE:
11MAY11
DOC ISSUE:
2
PROD. REV.
SCALE: SIZE:
SEE TABLE None
A
SHEET:
1 of 2
Print Date: 11-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.