D-150-0228 Datasheet, PDF (1/1 Pages) PANDUIT CORP. – (1 TO 1 SPLICES-CRIMP) SOLDERSHIELD SPLICE KIT, SHIELDED CABLE 26 THRU 12 AWG, Ni PLATED, 1 TO 4 CONDUCTORS

SPECIFICATION CONTROL DRAWING
Product Revisions Primary
Part Names
No.
D-150-0228 A
1
D-150-0229 B
1
D-150-0230 B
1
D-150-0231 A
2
D-150-0232 A
2
D-150-0233 B
2
D-150-0234 B
2
D-150-0235 A 3/4
D-150-0236 A 3/4
D-150-0237 A 3/4
D-150-0238 A 3/4
AWG
Range
26-20
20-16
16-12
26-20
18-16
14
12
26-20
22-20
18-16
14-12
Color
Code
Red
Blue
Yellow
Red
Blue
Yellow
Yellow
Red
Red
Blue
Yellow
L Max
80.52 (3.170)
80.52 (3.170)
80.52 (3.170)
105.92 (4.170)
105.92 (4.170)
105.92 (4.170)
105.92 (4.170)
105.92 (4.170)
105.92 (4.170)
105.92 (4.170)
105.92 (4.170)
Product Dimensions
A2.54
øD1
øD2
(0.100)
50.30 (1.970) 3.00 (0.118) 1.14 (0.045)
50.30 (1.970) 4.00 (0.157) 1.63 (0.064)
50.30 (1.970) 5.00 (0.197) 2.46 (0.097)
74.93 (2.950) 4.00 (0.157) 1.14 (0.045)
74.93 (2.950) 5.00 (0.197) 1.63 (0.064)
74.93 (2.950) 6.00 (0.236) 2.46 (0.097)
74.93 (2.950) 9.04 (0.356) 2.46 (0.097)
74.93 (2.950) 4.00 (0.157) 1.14 (0.045)
74.93 (2.950) 5.00 (0.197) 1.14 (0.045)
74.93 (2.950) 6.00 (0.236) 1.63 (0.064)
74.93 (2.950) 9.04 (0.356) 2.46 (0.097)
øD3
2.79 (0.110)
4.00 (0.157)
4.32 (0.170)
2.16 (0.085)
2.79 (0.110)
4.32 (0.170)
4.32 (0.170)
2.16 (0.085)
2.16 (0.085)
2.79 (0.110)
4.32 (0.170)
MATERIALS
1. SOLDERSHIELD SPLICE SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride sleeve,
containing two environment resistant sealing rings and a solder impregnated, flux-coated copper-wire braid.
Transparent blue.
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROM1 per ANSI J-STD-004.
2. CRIMP SPLICE (1, 2, OR 4 PER KIT): Nickel-plated copper alloy.
3. SEALING SPLICE SLEEVE (1, 2, OR 4 PER KIT): Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride
sleeve, containing two environment resistant sealing rings. Transparent blue.
APPLICATION
1. These kits are designed to make an environment-resistant, 1 to 1 in-line splice in shielded single, twisted pair, trio and quad
cables having nickel-plated conductors and insulations rated for 135C minimum.
2. Temperature rating: -55C to +150C.
3. For installation procedures refer to the applicable sections of Raychem Process Standard RCPS 150-02.
TE Connectivity
305 Constitutional Drive
Menlo Park, CA 94025 USA
RAYCHEM
Products
TITLE : (1 TO 1 SPLICES-CRIMP)
SOLDERSHIELD SPLICE KIT, SHIELDED
CABLE 26 THRU 12 AWG, Ni PLATED,
1 TO 4 CONDUCTORS
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets.
DOCUMENT NO.: D-150-0228/-0238
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
DATE:
15-Apr-11
DOC ISSUE:
7
DRAWN BY:
M. FORONDA
REPLACES:
D000671
DCR NUMBER:
D010337
PROD. REV.
SCALE: SIZE:
SEE TABLE None
A
SHEET:
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.