D-108-00 Datasheet, PDF (1/1 Pages) PANDUIT CORP. – SOLDERSLEEVE SHIELD TERMINATOR

SPECIFICATION CONTROL DRAWING
Product Revision
Product Name
D-108-00
F
D-108-01
F
D-108-02
E
D-108-03
F
Product Dimensions
L MAX
øA min
øB min
17.25
(0.680)
17.25
(0.680)
17.25
(0.680)
20.5
(0.810)
1.9
(0.075)
2.8
(0.110)
4.4
(0.175)
7.1
(0.280)
2.4
(0.095)
3.15
(0.125)
5.0
(0.200)
7.6
(0.300)
MATERIAL
1. INSULATION SLEEVE: HEAT-SHRINKABLE, RADIATION CROSS-LINKED POLYVINYLIDENE
FLOURIDE. TRANSPARENT BLUE.
2. SOLDER PREFORM WITH FLUX:
Solder: Sn96 Ag4 per ANSI J-STD-006.
Flux: ROL1 per ANSI J-STD-004.
3 & 4. MELTABLE INSERTS: Polyolefin-based thermoplastic. Color : red.
NOTES
A. The parts covered by this SCD are for use in attaching a ground wire to the shield of a cable. They may
be used on cables rated for at least 135°C minimum, having silver plated copper shields and meeting
the dimensional criteria shown in the table.
B. Parts will meet requirements of Raychem specification RT-1404 and National Aerospace Standard
NAS-1747 when installed per Raychem-approved convection or infrared tools in accordance with
Raychem assembly procedure RCPS-100-70.
TEMPERATURE RATING: -55°C to +175°C.
Raychem
THERMOFIT
DEVICES
Raychem Corporation
300 Constitution Drive
Menlo Park, CA 94025
USA
TITLE:
SOLDERSLEEVE
SHIELD TERMINATOR
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS.
DOCUMENT NO. : D-108-00/-01/-02/-03
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Raychem reserves the right to amend this
drawing at any time. Users should evaluate
the suitability of the product for their
application.
DCR NUMBER:
D980867
REPLACES:
D961392
DRAWN BY:
DATE:
PROD. REV.
DOC ISSUE: SCALE:
SIZE:
SHEET:
M. FORONDA
04/09/98
SEE TABLE
3
None
A
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.