CMRPSH15 Datasheet, PDF (1/2 Pages) PANDUIT CORP. – NETFRAME Cable Management Rack System

NETFRAME^® Cable Management Rack System
®
SPECIFICATION SHEET
specifications
Cable management rack shall be constructed of steel
and capable of mounting as 19" or 23" EIA rack. The
vertical channels shall have side and front pass
through holes. The vertical channels shall have slots
that can accommodate plastic d-rings, plastic bend
radius fingers and spools to provide vertical cable
management. The rear of the channel shall have an
unequal flange design that allows access to cables
inside the channel. The top of the rack shall have
integral waterfalls that feed to the front and center of
the vertical channels. The rack shall be capable of
accepting steel, full length, hinged doors. Rack
construction method shall ensure an electrically
bonded structure for ease of grounding.
technical information
Dimensions:
NFR84 (19") – 86.0"H x 28.4"W x 17.0"D (2183mm x 721mm x 432mm)
NFR84 (23") – 86.0"H x 32.4"W x 17.0"D (2183mm x 823mm x 432mm)
Standards:
Meets all EIA requirements as defined in EIA-310-D
Packaging:
Packaged with two vertical channels, top and bottom brackets, assembly
hardware that bonds the rack and installation instructions
key features and benefits
Modular system
Multiple vertical cable management options install easily
and allow user to configure system to their preferences
Mounts as 19" or 23" EIA rack Suitable for a variety of applications
NETFRAME ^® Rack System
19" or 23" x 7':
NFR84
NETFRAME ^® Vertical Cable
Management Options
4" x 6"D-ring kit (8):
Center D-ring
kit (16):
Bend radius finger
kit (8):
Fiber slack spool:
NFDR4X6K
NFCDRK
NFBRFK
NFSK
NETFRAME ^® Shelves
19"W x 18"D:
19"W x 25"D:
NFSHLF19X18
NFSHLF19X25
NETFRAME ^® Accessories
Hinged metal door
(4" x 7'):
(8" x 7'):
(12" x 7'):
NFD484
NFD884
NFD1284
Ladder
rack bracket:
NFLRB
End panel:
NFEP
Rack space identification
Allows for quick and easy location of rack spaces, speeding
(numbered at every fifth position) installation of horizontal rack mount items
Fully bonded structure
Two hole lug attachment simplifies grounding to assure
proper grounding technique
1500 lb. load rating
Accommodates large networking equipment
Deep vertical channel
Provides pathway for distribution cable
Slack manager:
Troughs
19" lower with
1.3" bend radius:
19" upper:
19" lower:
NFVSM4
CMLT19
CMUT19
CMT4
Open rear channel
Optional hinged metal door
Integral waterfalls
Pass through holes
Provides easy access to cables inside of vertical
channel simplifying moves, adds, and changes
Provides easy access to vertical pathway without having to
completely remove door
Provides bend radius control for cables as they go to
the front and inside of the vertical channels
Located on front and side to allow access from the patching
surface to the back of equipment as well as between racks
Power Strips 19" Horizontal
15 A:
20 A:
CMRPSH15
CMRPSH20
Power Strips 19" Vertical
39" single circuit: CMRPSV20
66" dual circuit: CMRPSVD20
applications
The NETFRAME ^® Cable Management Rack
System is designed to support heavy
networking equipment and can be used in
cross-connect and interconnect applications
in a telecommunications room. The
NETFRAME ^® System is completely modular and
can manage high performance copper and
fiber patch cables.
This modular rack system is compatible with
the PANDUIT horizontal cable management
panels, including the NETMANAGER^™ Cable
Manager, PATCHLINK ,^™ and OPEN-ACCESS^™
D-ring options, OPTICOM ^® Fiber Optic
Enclosures and MINI-COM ^® Patch Panels.
www.panduit.com