AN26065A Datasheet, PDF (7/31 Pages) Panasonic Battery Group – UMTS Triple Band LNA-IC (Band I, II, IV, IX / V, XIII)

AN26065A
„ Current and Voltage Ranges for Pins
Note) y The ranges on the list are the voltages of respective pins in relation to GND.
y Do not apply the voltages or the currents from external into the pins which are not on the list.
y The values shows voltage to the GND unless otherwise specified. (+) is inlet current and (–) is outlet current in the circuit.
y Voltage applying exceeding below ratings leads to the malfunction and the damage of the device.
y Below ratings are specified regarding malfunction and stress, not for operation guaranty.
Pin No.
A1
A2
A3
A4
B1
B2
B3
B4
C1
C2
C3
C4
OUT1
OUT2
OUT3
CNT1
VCC
GND
CNT2
N.C.
IN1
IN2
IN3
CNT3
Pin name
Range
Unit
– 0.3 to (V_CC)
V
– 0.3 to (V_CC)
V
– 0.3 to (V_CC)
V
– 0.3 to (V_CC)
V
0 to 3.0
V
0
V
– 0.3 to (V_CC)
V
—
V
—
V
—
V
—
V
– 0.3 to (V_CC)
V
Notes) *1 : Same as GND pin.
*2 : RF signal input pin. (Maximum input power is 0dBm.) Do not apply DC voltages.
Note
—
—
—
—
—
*1
—
—
*2
*2
*2
—
Ver. AEB
7