DS Datasheet, PDF (3/6 Pages) Panasonic Battery Group – DS RELAYS

DS
2. Specifications
Characteristics
Contact
Rating
Item
Arrangement
Initial contact resistance, max.
Contact material
Nominal switching capacity
Max. switching power
Max. switching voltage
Max. carrying current
Min. switching capacity (Reference value)*¹
Nominal operating power
Insulation resistance (Initial)
Electrical
characteristics
Mechanical
characteristics
Expected life
Conditions
Unit weight
Between open contacts
Breakdown voltage
(Initial)
Between contact and coil
Temperature rise
Operate time [Set time] (at 20°C 68°F)
Release time [Reset time] (at 20°C 68°F)
Shock resistance
Vibration resistance
Mechanical
Electrical
Functional*²
Destructive
Functional
Destructive
Conditions for operation, transport and storage*³
Max. operating speed (at rated load)
Specifications
1 Form C
2 Form C
Max. 50 mΩ (By voltage drop 6 V DC 1A)
Ag+Au clad
2 A 30 V DC (resistive load)
60 W, 125 VA (resistive load)
220 V DC, 250 V AC
3A
10µA 10m V DC
Single side stable (S type: 200 mW); latching (S type: 180 mW)
Min. 100MΩ (at 500V DC)
Measurement at same location as “Initial breakdown voltage” section.
1,000 Vrms for 1min.
(500 Vrms for 1min: 1 Form C type) (Detection current: 10mA.)
1,500 Vrms for 1min.
(1,000 Vrms for 1min: 1 Form C type) (Detection current: 10mA.)
Max. 65°C
(By resistive method, nominal coil voltage applied to the coil, contact carrying current: 2A.)
Max. 10 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
Max. 5 ms [10 ms] (Nominal coil voltage applied to the coil, excluding contact bounce time.)
(without diode)
Min. 490 m/s²
Min. 490 m/s²
Min. 980 m/s² (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 3.3 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 5 mm
Min. 10⁸ (10⁷: 1 Form C latching type) (at 600 cpm)
Min. 5×10⁵ rated load (at 60 cpm)
Ambient temperature: –40°C to +70°C –40°F to +158°F
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
60 cpm
Approx. 3 g .11 oz
Approx. 4g .14oz
Notes: *1 This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load. (TX/TX-S/TX-D relay AgPd contact type are available for low level load switching [10V DC, 10mA max. level])
*2 Half-wave pulse of sine wave: 11ms; detection time: 10µs
*3 Refer to 6. Conditions for operation, transport and storage mentioned in AMBIENT ENVIRONMENT (Page 24).
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB17E 201209-T