ECWU1C124JC9_1 Datasheet, PDF (1/13 Pages) Panasonic Battery Group – Film Chip Capacitor Stacked metallized PEN film as dielectric with simple mold - less construction

Film Chip Capacitor
Type: ECWU(C)
Film Chip Capacitor
Stacked metallized PEN film as dielectric with simple
mold - less construction
I Features
Small in size
Applicable for reflow soldering
IRecommended Applications
Coupling
By - pass
General purpose
IExplanation of Part Numbers
1
2
EC
Product code
3
4
WU
Dielectric
&
construction
5
6
Rated voltage
1C 16VDC
1H 50VDC
1 100VDC
2 250VDC
7
8
9
10
11
C
Nominal capacitance Cap. Tol. Suffix
12
Suffix
J ±5%
K ±10%
Tape width
9 12mm
V 16mm
Z 24mm
I Specifications
Category temp.range
Rated voltage
Capacitance range
Capacitance tolerance
Withstand voltage
Dissipation factor
Insulation resistance
Soldering conditions
16VDC, 50VDC: - 55 to + 105:
100VDC, 250VDC: - 40 to + 85:
16VDC, 50VDC, 100VDC, 250VDC
16VDC
50VDC
0.12 to 0.47 µF (E12)
0.056 to 0.22 µF (E12)
100VDC
250VDC
16VDC,50VDC
100VDC,250VDC
0.012 to 1.0 µF (E12)
0.001 to 1.0 µF (E12)
± 5%(J)
± 10%(K) (100VDC, C^<=0.15 µF ± 5%(J), ± 10%(K))
Between terminals
16VDC, 50VDC:Rated volt. (VDC)x175% 1 to 5s
100VDC, 250VDC:Rated volt. (VDC)x150% 60s
<= _{1.0%(20:,1kHz)}
C^<= 0.33 µF
16VDC:_=> 3000MΩ • (20:,10VDC, 60s)
50VDC:_=> 3000MΩ • (20:,50VDC, 60s)
100VDC, 250VDC:_=> 3000MΩ • (20:,100VDC,60s)
C>0.33 µF
16VDC:1000MΩ • µF min. (20:,10VDC, 60s)
100VDC, 250VDC:1000MΩ • µF min. (20:,100VDC,60s)
Reflow soldering
16VDC, 50VDC:240: max. and 30 sec max. at more than 210˚C (Temp. at cap. surface)
100VDC, 250VDC:230: max. and 30 sec max.at more than 210˚C (Temp.at cap.surface)
Design and specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.
Whenever a doubt about safety arises from this product, please contact us immediately for technical consultation.