AN26032A Datasheet, PDF (1/11 Pages) Panasonic Battery Group – Ultra small , Single Band LNA-IC with Band-limiting filter for 600 MHz Band Applications

AN26032A
Ultra small , Single Band LNA-IC
with Band-limiting filter for 600 MHz Band Applications
FEATURES
DESCRIPTION
• Low voltage operation
+2.85 V typ.
AN26032A is single band LNA-IC for 600 MHz Band
• Low current consumption
applications.
4 mA typ. (High-Gain mode)
It realizes high performance by using 0.18 µm SiGeC
1 µA typ. (Low-Gain mode)
Bi-CMOS process (f_T = 90 GHz, f_max = 140 GHz).
• High gain 14.0 dB typ. fRX = 620 MHz (High-Gain mode) ^{High/Low Gain mode is changeable, controlled by}
integrated CMOS logic circuit.
• Low noise figure
The Band limiting filter is built-in.
1.20 dB typ. fRX = 620 MHz (High-Gain mode)
A WLCSP package (Wafer Level Chip Sized Package)
• Low distortion (IIP3 +10 MHz offset)
achieves miniaturization.
4 dBm typ. fRX = 620 MHz (High-Gain mode)
• Small and thin package 6 pin Wafer level chip size package
(WLCSP)
APPLICATIONS
zDTV（UHF）
SIMPLIFIED APPLICATION
RF output
50 Ω
L2
Components Size
L1
0603
L2
0603
Value
Part Number
8.2 nH LQP03TN8N2H04
12 nH LQP03TN12NJ04
Vendor
Murata
Murata
TOP VIEW
A3
B3
V_CC
C1
0603
1 000 pF GRM033B11C102KD01 Murata
C2
0603
100 000 pF GRM33B30J104KE18
Murata
A2
B2
A1
B1
C1
Notes) This application circuit is an example. The operation of mass
C2
production set is not guaranteed. You should perform enough
evaluation and verification on the design of mass production
set. You are fully responsible for the incorporation of the
above application circuit and information in the design of your
CNT
equipment.
(Gain cnt)
L1
RF input
50 Ω
Publication date: February 2013
1
Ver. CEB