AN26011A_13 Datasheet, PDF (1/17 Pages) Panasonic Battery Group – LNA-IC for 800MHz / 450MHz Band Applications

AN26011A
LNA-IC for 800MHz / 450MHz Band Applications
FEATURES
DESCRIPTION
• Low voltage operation
• High gain
15.0 dB typ.
16.0 dB typ.
• Low noise figure 1.40 dB typ.
1.30 dB typ.
• Low distortion
(IIP3 +10 MHz offset)
+2.80 V typ.
fRX = 881.5 MHz
fRX = 450 MHz
fRX = 881.5 MHz
fRX = 450 MHz
AN26011A is LNA-IC for 800MHz / 450MHz Band
Applications.
Realizing high performance by using 0.18 µm SiGeC
Bi-CMOS process(f_T = 90 GHz, f_max = 140 GHz).
Low Gain mode is available, controlled by integrated
CMOS logic circuit.
Achieving miniaturization by using small size package.
+10.0 dBm typ. fRX = 881.5 MHz
+10.0 dBm typ. fRX= 450 MHz
• 5 pin Plastic Small Surface Mount Package (SMINI Type)
APPLICATIONS
zCellular Phone 800MHz / 450MHz Band Application
SIMPLIFIED APPLICATION
TOP VIEW
OUT
V_CC
50Ω
C4
C3
L3
L2
5
4
OUT
V_CC
Components
L1
L2
L3
C1
C2
C3
C4
Size
0603
0603
0603
0603
0603
0603
0603
Value
12 nH
12 nH
10 nH
1000 pF
4.0 pF
4.0 pF
0.1 μF
Part Number
LQPT03TN12NH04
LQPT03TN12NH04
LQPT03TN10NH04
GRM033B11C102KD01
GJM0332C1E4R0BB01D
GJM0332C1E4R0BB01D
GRM033B30J104KE18
Vendor
Murata
Murata
Murata
Murata
Murata
Murata
Murata
IN
1
C1
GND
2
L1 _C2
50Ω
IN
CNT
3
(Gain Control)
Notes) This application circuit is an example. The operation of mass
production set is not guaranteed. You should perform enough
evaluation and verification on the design of mass production
set. You are fully responsible for the incorporation of the
above application circuit and information in the design of your
equipment.
Publication date: March 2013
1
Ver. CEB