EVPAA202K Datasheet, PDF (8/8 Pages) Panasonic Semiconductor – LIGHT TOUCH SWITCH

Classification
REFERENCE SPECIFICATION
Issue No.
20090853
Part Name _{LIGHT TOUCH SWITCH}
Part No.
EVPAA202K
8/8
<Prohibitions and precaution for handling>
【Prohibited items on fire and smoking】
・Absolutely avoid use of a product beyond its rated range because doing so may cause a fire.
If misuse or abnormal use may result under conditions in which the product is used out of its
rated range,take proper measures such as current interruption using a protective circuit.
・The grade of nonflammability for resin used in product is "94HB," which is based on UL94
Standards (flammability test for plastic materials). Prohibit use in a location where a
spreading fire may be generated or prepare against a spreading fire.
【For use in equipment for which safety is requested】
・Although care is taken to ensure product quality,inferior characteristics,short circuits,
and open circuits are some problems that might be generated, To design an equipment which
places maximum emphasis on safety,review the effect of any single fault of a product
in advance and perform virtually fail-safe design to ensure maximum safety by:
ï½¥Preparing a protective circuit or a protective device to improve system safety,and equipment.
ï½¥Preparing a redundant circuit to improve system safety so that the single fault
of a product does not cause a dangerous situation.
【Attentions required for storage condition】
・When this product is to be stored in the following circumstances and conditions,it may
affect on the performance deteriorations and solderability etc.,avoid storing in the
following conditions.
(1)A place where the temperature is -10℃ max.,+40℃ min. and the humidity is 85% min.
(2)In the corrosive gas atmosphere.
(3)Long-term storage for 6 months min.
(4)A place where the product is exposed to direct sunlight.
・Store in packed condition so that the load stress is not applied.
・Please use this product as soon as possible,our recommendation is within 3 months and the
1imitation is 6 months.
・If any remainder left after packing is opened,store it with proper moistureproofing and
gasproofing,etc.,
・The switch shall be packed by Nylon sheet in the box like original packaging style when
it will be an inventory after using on the assembly machine at your production line.
Panasonic Electronic Devices Co., Ltd.