AXE616124 Datasheet, PDF (6/10 Pages) Panasonic Semiconductor – Narrow pitch connectors (0.4mm pitch)

AXE5, 6
For board-to-FPC
Connectors for
inspection usage
(0.4mm pitch)
A4S Series
Socket
Header
RoHS compliant
FEATURES
1. 3,000 mating and unmating cycles
2. Same external dimensions and foot
pattern as standard type.
3. Improved mating
Insertion and removal easy due to a
reduction in mating retention force. This
is made possible by a simple locking
structure design.
Note: Mating retention force cannot be
warranted.
APPLICATIONS
Ideal for module unit inspection and
equipment assembly inspection
TABLE OF PRODUCT TYPES
✩: Available for sale
Product name
Number of pins
A4S
for inspection
10 12 14 16 18 20 22 24 26 28 30 32 34 36 40 44 50 54 60 64 70 80
✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩✩
Notes: 1. Please inquire about number of pins other than those shown above.
2. Please inquire with us regarding availability.
3. Please keep the minimum order quantities no less than 50 pieces per lot.
4. Please inquire if further information is needed.
PRODUCT TYPES
Specifications
Part No.
Specifications
Socket
Without positioning bosses
AXE5E∗∗26
Header
Without positioning bosses
Note: When placing an order, substitute the “∗” (asterisk) in the above part number with the number of pins for the specific connector.
Part No.
AXE6E∗∗26
NOTES
Ⅵ Recommended PC board and metal
mask patterns
Connectors are mounted with high pitch
density, intervals of 0.35 mm, 0.4 mm or
0.5 mm.
In order to reduce solder and flux rise,
solder bridges and other issues make
sure the proper levels of solder is used.
The figures to the right are recommended
metal mask patterns. Please use them as
a reference.
• Socket (Mated height: 0.8mm/1.0mm)
Recommended PC board pattern (TOP VIEW)
0.40±0.03
0.23±0.03
0.90±0.03
1.45±0.03
C
0.30
: Insulation area
Recommended metal mask pattern
Metal mask thickness: When 120µm
(Terminal opening ratio: 70%)
(Metal-part opening ratio: 100%)
0.40±0.01
0.20±0.01
• Header (Mated height: 0.8mm/1.0mm)
Recommended PC board pattern (TOP VIEW)
0.40±0.03
0.23±0.03
0.45±0.03
0.80±0.03
Recommended metal mask pattern
Metal mask thickness: When 120µm
(Terminal opening ratio: 70%)
(Metal-part opening ratio: 100%)
0.40±0.01
0.20±0.01
0.90±0.01
1.45±0.01
C
0.30
0.45±0.01
0.80±0.01
Please refer to the latest product
specifications when designing your
product.
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
ACCTB7E 201303-T