AN8737SB Datasheet, PDF (6/8 Pages) Panasonic Semiconductor – 3-channel driver IC for optical disk drive

AN8737SB
s Usage Notes (continued)
5. On the output maximum amplitude (Reference data: typical value)
5.0
ICs for Optical Disk Drive
4.5
4.0
3.5
3.0
0.4
0.6
0.8
1.0 1.1
Use load current at 1 A or less.
Load current (A)
6 Appropriate care should be taken on the characteristics.
When changing an external circuit constant on actual use, secure an appropriate margin in consideration of charac-
teristic fluctuation of external parts and our ICs including transient characteristics as well as static ones.
7 Avoid the short-circuits between output pin or current detection pin and V_CC (line-to-supply fault), output pin or
current detection pin and GND (line-to-ground fault), and output pins or output pin and current detection pin (load
short-ciruit).
8 An appropriate prior study should be done for use of dip soldering.
9 Care should be taken on use of the following pin because of its low static breakdown voltage (C = 200 pF, R = 0 Ω).
Pin 18: Breakdown at 200 V
6