AN5870K Datasheet, PDF (6/14 Pages) Panasonic Semiconductor – Wide bandwidth analog switch IC

AN5870K
ICs for TV
s Electrical Characteristics at T_a = 25°C (continued)
Parameter
Symbol
Conditions
Min Typ Max Unit
Signal processing system (continued)
Relative frequency
characteristics 4 (300 MHz)
∆f_C4 Relative difference to f_C4
−1.5 0.0 +1.5 dB
G-sync. frequency characteristics f_CGS
(35 MHz)
Pin 22: 0 V or 5 V, pin 5 or 7: SG3
signal, pin 25: Measurement
−4.0 −2.5 −1.0 dB
Relative gain between 2 inputs ∆G_VCH1 Relative difference at 1 MHz between − 0.5 0.0 +0.5 dB
same channel of G_V1 and G_V2
Relative frequency characteristics ∆f_C1 Relative difference at 100 MHz between − 0.5 0.0 +0.5 dB
between 2 inputs (1)
the same channels of f_C1 and f_C2
Relative frequency characteristics ∆f_C2 Relative difference at 300MHz between −1.0 0.0 +1.0 dB
between 2 inputs (2)
the same channels of f_C3 and f_C4
Crosstalk between RGB 3
(100 MHz)
CTC₃ Pin 22: 0 V, pin 1 or 5 or 9: SG4 signal,  −40 −30 dB
pins 23, 27, 29: Measurement
Crosstalk between RGB 4
(100 MHz)
CTC₄ Pin 22: 5 V, pin 3 or 7 or 11: SG4 signal,  −40 −30 dB
pins 23, 27, 29: Measurement
Crosstalk between 2 inputs (3) CTI₃ Pin 22: 5 V, pin 1 or 5 or 9: SG4 signal,  −50 −40 dB
(100 MHz)
pins 29, 27, 23: Measurement
Crosstalk between 2 inputs (4) CTI₄ Pin 22: 0 V, pin 3 or 7 or 11: SG4 signal,  −50 −40 dB
(100 MHz)
pins 29, 27, 23: Measurement
Crosstalk between RGB 5
(300 MHz)
CTC₅ Pin 22: 0 V, pin 1 or 5 or 9: SG5 signal,  −25  dB
pins 23, 27, 29: Measurement
Crosstalk between RGB 6
(300 MHz)
CTC₆ Pin 22: 5 V, pin 3 or 7 or 11: SG5 signal,  −25  dB
pins 23, 27, 29: Measurement
Crosstalk between 2 inputs 5
CTI₅ Pin 22: 5 V, pin 1 or 5 or 9: SG5 signal,  −30 
dB
(300 MHz)
pins 23, 27, 29: Measurement
Crosstalk between 2 inputs 6
CTI₆ Pin 22: 0 V, pin 3 or 7or 11: SG5 signal,  −30 
dB
(300 MHz)
pins 23, 27, 29: Measurement
Rise time (1)
t_r1
Pin 22: 0 V, pin 1 or 5 or 9: SG9 signal,  1.2 
ns
pins 23, 27, 29: Measurement
Rise time (2)
t_r2
Pin 22: 5 V, pin 3 or 7or 11: SG9 signal,  1.2 
ns
pins 23, 27, 29: Measurement
Fall time (1)
t_f1
Pin 22: 0 V, pin 1 or 5 or 9: SG9 signal,  1.2 
ns
pins 23, 27, 29: Measurement
Fall time (2)
t_f2
Pin 22: 5 V, pin 3 or 7or 11: SG9 signal,  1.2 
ns
pins 23, 27, 29: Measurement
Output VSWR/75 Ω
Γ_o Pin 23 or 27 or 29: SG5 signal,
 1.6 
voltage standing ratio measurement
6