|
AXK5 Datasheet, PDF (5/10 Pages) Panasonic Semiconductor – NARROW-PITCH CONNECTORS FOR BOARD-TO-FPC CONNECTION | |||
|
◁ |
AXK(5(S)/6(S))
SPECIFICATIONS
1. Characteristics
Item
Electrical
characteristics
Rated current
Rated voltage
Breakdown voltage
Insulation resistance
Contact resistance
Mechanical
characteristics
Composite insertion
force
Composite removal
force
Contact holding force
Ambient temperature
Soldering heat
resistance
Thermal shock
resistance (header
and socket mated)
Environmental
characteristics
Humidity resistance
(header and socket
mated)
Saltwater spray
resistance (header
and socket mated)
Lifetime
characteristics
H2S resistance
(header and socket
mated)
Insertion and removal
life
Unit weight
3mm, 3.5mm type
0.5A/terminal (Max. 10A)
Speciï¬cations
4mm, 4.5mm, 5mm,
5.5mm, 6mm, 6.5mm type
7mm, 8mm, 9mm type
0.5A/terminal (Max. 16A)
60V AC/DC
150V AC for 1 min.
Min. 1000Mâ¦
Max. 60mâ¦
Max. 80mâ¦
Max. 0.785N {80gf} Ã no. of contacts (initial)
Conditions
Detection current: 1mA
Using 500V DC megger
Based on the contact resistance
measurement method speciï¬ed
by JIS C 5402.
Min. 0.0588N {6gf} Ã no. of contacts
Min. 0.98N {100gf}/contacts
â55°C to +85°C
Max. peak temperature of 260°C
(on the surface of the PC board around the connector terminals)
300°C within 5 sec., 350°C within 3 sec.
5 cycles, insulation resistance min. 100Mâ¦,
contact resistance max. 60mâ¦
5 cycles,
insulation resistance
min. 100Mâ¦,
contact resistance
max. 80mâ¦
120 hours, insulation resistance min. 100Mâ¦,
contact resistance max. 60mâ¦
24 hours, insulation resistance min. 100Mâ¦,
contact resistance max. 60mâ¦
120 hours,
24 hours,
insulation resistance
min. 100Mâ¦,
contact resistance
max. 80mâ¦
insulation resistance
min. 100Mâ¦,
contact resistance
max. 80mâ¦
48 hours, contact resistance max. 60mâ¦
48 hours, contact resistance
max. 80mâ¦
50 times
P5K 3mm 30 contacts
P5KS 4mm 30 contacts
Socket: 0.17g Header: 0.09g
Socket: 0.18g Header: 0.16g
Measuring the maximum force.
As the contact is axially pull out.
No freezing at low temperatures
Infrared reï¬ow soldering
Soldering iron
Sequence
1.
â55
0
â3
°C,
30
minutes
2. ~ , Max. 5 minutes
3.
85
+3
0
°C,
30
minutes
4. ~ , Max. 5 minutes
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwarter concentration 5±1%
Bath temperature 40±2°C,
gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Repeated insertion and removal
speed of max. 200 times/hours
2. Material and surface treatment
Part name
Mated height 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7mm, 8mm, 9mm
Material
Surface treatment
Molded portion
Heat-resistant resin (UL94V-0)
â
Contact/post
Copper alloy
Contact portion: Ni plating on base, Au plating on surface
Terminal portion: Ni plating on base, Au plating on surface (Except for thick of terminal)
The section close to the soldering portion has a nickel barrier.
(The nickel base is exposed.)
DIMENSIONS (Unit: mm) The CAD data of the products with a
P5K: Mated height 3mm, 3.5mm type
⢠Socket
CAD Data
mark can be downloaded from: http://panasonic-electric-works.net/ac
CAD Data
A
B±0.1
0.5±0.05
0.5±0.05
2.35
0.2±0.03
2.15
(0.9)
Dimension table (mm)
No. of contacts A
B
20
8.20 4.50
22
8.70 5.00
30
10.70 7.00
34
11.70 8.00
40
13.20 9.50
50
15.70 12.00
60
18.20 14.50
70
20.70 17.00
80
23.20 19.50
100
28.20 24.50
120
33.20 29.50
5
Suction
face
1.44
5.8
4
(0.9)
0.17±0.03
(Terminal flatness)
0.1
General tolerance: ±0.2
panasonic-electric-works.net/ac
|
▷ |