MN39260F Datasheet, PDF (4/9 Pages) Panasonic Semiconductor – 4.5 mm (type-1/4) 810k-pixel CCD Area Image Sensor

MN39260FH
■ Absolute Maximum Ratings and Operating Conditions (continued)
Note) 1. Standard photo detecting condition
Standard photo detecting condition stands for detecting image with a light source of color temperature of 2 856K, luminance
of 1 050 cd/m², and using a color temperature conversion filter LB-40 (HOYA), infrared cut filter CAW-500S with thickness
2.5 mm for a light path and with F8 lens aperture. The quantity of the incidental light to a photo-detecting surface under the
above condition is defined as the standard quantity of light.
2. _*1: V_Sub when using electronic shutter function
φV_Sub H
φV_Sub L
GND
φV_Sub (V)
V_Sub (V)
(Supplied internally)
* ^{φSub pulse generates once every 1 V period.}
*2: ^VSub ^{supplied internally is the voltage suppressing the blooming generation at ×500 light quantity relative to the}
standard light quantity.
*3: ^{Relation between V}PT ^{and V}φVL
Set V_PT under the following condition against VL of a vertical transfer clock waveform.
V_PT ≤ VL (V_φV1L to V_φV4L)
*4: ^{Absolute maximum ratings − 0.2 < V}φV ^{− V}PT ^{< 24.5 (V)}
■ Optical Characteristics
Parameter Symbol
Conditions
Carrier saturation output Sc J chart
Sensitivity
So J chart F1.4, 1/32 ND
Vertical smear
Sm 1/10 V chart, F1.4
Min Typ Max Unit
500


mV
80
110

mV


0.01
%
Note) The above-mentioned characteristics are the values on driving the device for the imaging stabilizer mode (1/60 seconds
accumulation).
4
SMD00004BEC