English
Language : 

MN31121SA Datasheet, PDF (4/11 Pages) Panasonic Semiconductor – CCD Image Sensor Vertical Driver IC
◁
MN31121SA
■ Electrical Characteristics (continued)
2. Operating Conditions at Ta = −10°C to +70°C
Parameter
Symbol
Supply voltage 1
Supply voltage 2
Supply voltage 3
Supply voltage 4
Supply voltage 5
Negative supply voltage
Input frequency
VHH-VL
VH-VL
VM13 , VM24
VHH-VM13
VHH-VM24
VDC
VL
fIN
Conditions
Min Typ Max Unit
VH-VL  30.5 V
17  28
V
−1  4
V
12  
V
2.5  3.6 V
−10  −4
V
  20 kHz
3. DC Characteristics at VHH = 18.0 V, VH = 13.0 V, VM13 = VM24 = 1.0 V, VL = −7.0 V, VDC = 3.00 V, Ta = −10°C to +70°C
Parameter
Symbol
Conditions
Min Typ Max Unit
Quiescent supply current
Operating supply current
IDDST
VI = GND, VDC = 2.6 V
  2 mA
VI = GND, VDC = 3.0 V
 5
IDDDYN Refer to test conditions
  7 mA
(Input pulse timing, output load circuit)
VI = GND, VDC
Input Pins
IV1 , IV2 , IV3 , IV4 , CH1, CH2, ISUB
High-level voltage
VIH
VDC = 2.6 V
Low-level voltage
VIL
High-level voltage
VIH
VDC = 3.0 V
Low-level voltage
VIL
Input leakage current
IILK
VI = 0 V to VDC
Output Pins 1 (2-value outputs) OV2 , OV4
Mid-level output voltage
VOM1
IOM1 = −1 mA
Low-level output voltage
VOL1
IOL1 = 1 mA
Output on resistance (mid level) RONM1 IOM1 = −50 mA
Output on resistance (low level) RONL1 IOL1 = 50 mA
Output Pins 2 (3-value outputs) OV1 , OV3
High-level output voltage
VOH2
IOH2 = −1 mA
Mid-level output voltage
VOM2
IOM2 = −1 mA
Low-level output voltage
VOL2
IOL2 = 1 mA
Output on resistance (high level) RONH2 IOH2 = −50 mA
Output on resistance (mid level) RONM2 IOM2 = ±50 mA
Output on resistance (low level) RONL2 IOL2 = 50 mA
1.75  VDC V
0.0  0.15 V
2.5  VDC
V
0.0  0.3 V
−1.0  +1.0 µA
0.9  VM24 V
VL  −6.9 V
  60
Ω
  40
Ω
12.9  VH
V
0.9  VM13 V
VL  −6.9 V
  70
Ω
  60
Ω
  60
Ω
Output Pins 3 (SUB outputs)
High-level output voltage
Low-level output voltage
OSUB
VOHH3
VOL3
IOHH3 = −1 mA
IOL3 = 1 mA
17.9  VHH V
VL  −6.9 V
4
SDB00054CEM
 ▷