|
EVPAA002K Datasheet, PDF (4/8 Pages) Panasonic Semiconductor – LIGHT TOUCH SWITCH | |||
|
◁ |
Classification
REFERENCE SPECIFICATION
Part Name LIGHT TOUCH SWITCH
Part No.
EVPAA002K
5.2 Mechanical characteristics
No.
ITEM
TEST CONDITION
5.2.1 Operation
force
5.2.2 Travel to
closure
5.2.3 Push
strength
50 N for 60 sec.
Issue No.
20090851
4/8
PERFORMANCE
Push force
1.0
+
-
0.50
0.50
N
Return force
0.1 N min.
0.15
+ 0.10
- 0.10
mm
No damage
(Electrical and
mechanical)
5.2.4 Vibration
test
1) Amplitude : 1.5 mm
2) Sweep rate : 10-55-10Hz for 1 minute
3) Sweep method : Logarithmic frequency
sweep rate
4) Vibration direction : X,Y,Z(3 directions)
5) Time : Each direction 2 hours
(Total 6 hours)
No.5.1 and
5.2.1 to 5.2.2 shall
be satisfied.
5.2.5 Soldering
heat test
Mount the switch on P.W.B by adhesive.
1) Reflow process 2 times.
(Refer to section 6.1)
2) Standard conditions after test : 1 hours
Contact resistance
100 mΩ max.
No.5.1.2 to 5.1.4 and
No.5.2.1 to 5.2.2
shall be satisfied.
5.2.6 Solderbility
After spreading flux, the terminal is immersed 95% or more of surface
in solder with following condition.
area(Excluding ruptured
Solder ber : M705/Sn-3.0Ag-0.5Cu
surface)where is
(Senju Metal Indusry Co.,Ltd.) immersed in solder
Flux : CF-110VH-2A (tamura kaken)
shall be covered by new
Soldering temperture : 260±5â
solder.
Soldering time : 2±0.5 sec.
Panasonic Electronic Devices Co., Ltd.
|
▷ |