ERO-S2PHF3301 Datasheet, PDF (3/4 Pages) Panasonic Semiconductor – Metal Film Resistors

● Radial Taping for small type
P2
P
h
A
fD
fd
P1
F
Metal Film Resistors
Type
Metal Film R
Part Numbers
EROS2GHO२२२२
Std. Qty.
(pcs.)
2000
l
P0
fD0
Dimensions (mm)
P
12.7±1.0
P0
12.7±0.3
P1
3.85±0.70
P2
6.35±1.00
F
5.0±0.5
W
18.0±0.5
Dimensions (mm)
W0
5 min.
W1
9.0±0.5
W2
3 max.
H0
19.0^{+–01..05}
fD0
4.0±0.2
k
0 max.
Dimensions (mm)
ͬh
0±2
t
0.7±0.2
A
3.2±0.2
fD
1.7^{+–00..12}
fd
0.45±0.05
Indication
45
320
Safety Precautions
The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors
shown on page ER3 of this catalog.
1. Keep the rated power and ambient temperature within the specified derating curve.
* When positioning and mounting Metal Film Resistors (hereafter called the resistors), make allowance for the
effect of heat generated through close contact between the resistors and neighboring components and for the
temperature rise of adjacent heat-generating components.
2. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the
operations of the resistors when installed in your products before use.
When applying pulses to the resistors, keep the pulse peak within the rated voltage.
3. When the resistors' protective coatings are chipped, flawed, or removed, the characteristics of the resistors may
be impaired. Take special care not to apply mechanical shock during automatic mounting or cause damage
during handling of the boards with the resistors mounted.
4. Ultrasonic cleaning may cut the lead wire due to resonance. Try and check it before use.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006