AN8481SB Datasheet, PDF (3/6 Pages) Panasonic Semiconductor – Spindle motor driver IC for optical disk

ICs for Motor
AN8481SB
s Pin Descriptions (continued)
Pin No. Symbol
Description
21
REF SW-REG reference setting pin
22
CS1 Current det. pin 1
23
N.C. N.C.
24
N.C. N.C.
Pin No. Symbol
Description
25
A3 Drive output 3
26
A2 Drive output 2
27
A1 Drive output 1
28
PG Power GND pin
s Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Supply voltage
V_CC
7.0
V
V_M
14.4
V_REG
Control signal input voltage ^*4
V_(n)
0 to V_CC
V
Supply current
I_CC
30
mA
Output current ^*3
I_O(n)
±1 200
mA
Hall bias current
I_HB
50
mA
Power dissipation ^*2
P_D
667
mW
Operating ambient temperature ^*1
T_opr
−20 to +70
°C
Storage temperature ^*1
T_stg
−55 to +150
°C
Note) Do not apply external currents or voltages to any pins not specifically mentioned.
For circuit currents, '+' denotes current flowing into the IC, and '−' denotes current flowing out of the IC.
*1: ^{Except for the operating ambient temperature and storage temperature, all ratings are for T}a ^{= 25°C.}
*2: ^{For 70°C and IC alone.}
*3: ^{n = 22, 25, 26, 27, 28}
*4: ^{n = 1, 2, 3, 4, 5, 6, 8, 10, 11}
s Recommended Operating Range
Parameter
Symbol
Range
Unit
Supply voltage
V_CC
4.25 to 5.5
V
V_M
4.5 to 14
V_REG
s Electrical Characteristics at T_a = 25°C
Parameter
Symbol
Conditions
Min Typ Max Unit
Overall
Circuit current 1
Circuit current 2
Start/stop
I_CC1 V_CC = 5 V in power save mode
I_CC2 V_CC = 5 V, I_O = 0 mA
 0 0.1 mA
 8 16 mA
Start voltage
Stop voltage
V_START Voltage with which a circuit operates 3.5  
V
at V_CC = 5 V and L → H
V_STOP Voltage with which a circuit becomes   1.0 V
off at V_CC = 5 V and H → L
3