English
Language : 

JM1AN-ZTMP-DC5V-F Datasheet, PDF (2/4 Pages) Panasonic Semiconductor – Ideal for compressor and motor control Inrush 80A, 1a 20A power relay
JM
TYPES
Nominal coil voltage
TMP type (Flat)
5V DC
JM1aN-ZTMP-DC5V-F
6V DC
JM1aN-ZTMP-DC6V-F
9V DC
JM1aN-ZTMP-DC9V-F
12V DC
JM1aN-ZTMP-DC12V-F
24V DC
JM1aN-ZTMP-DC24V-F
48V DC
JM1aN-ZTMP-DC48V-F
Standard packing: Carton 50 pcs., Case 200 pcs.
TM type (Flat)
JM1aN-ZTM-DC5V-F
JM1aN-ZTM-DC6V-F
JM1aN-ZTM-DC9V-F
JM1aN-ZTM-DC12V-F
JM1aN-ZTM-DC24V-F
JM1aN-ZTM-DC48V-F
Part No.
TMP type (Slim)
JM1aN-TMP-DC5V-F
JM1aN-TMP-DC6V-F
JM1aN-TMP-DC9V-F
JM1aN-TMP-DC12V-F
JM1aN-TMP-DC24V-F
JM1aN-TMP-DC48V-F
PCB type (Slim)
JM1aN-P-DC5V-F
JM1aN-P-DC6V-F
JM1aN-P-DC9V-F
JM1aN-P-DC12V-F
JM1aN-P-DC24V-F
JM1aN-P-DC48V-F
RATING
1. Coil data
Nominal coil
voltage
5V DC
6V DC
9V DC
12V DC
24V DC
48V DC
Pick-up voltage
(at 20°C 68°F)
70%V or less of
nominal voltage
(Initial)
Drop-out voltage
(at 20°C 68°F)
10%V or more of
nominal voltage
(Initial)
Nominal operating
current
[±10%] (at 20°C 68°F)
180 mA
150 mA
100 mA
75 mA
37.5 mA
18.75mA
Coil resistance
[±10%] (at 20°C 68°F)
27.8Ω
40 Ω
90 Ω
160 Ω
640 Ω
2,560 Ω
Nominal operating
power
900mW
Max. applied voltage
(at 60°C 140°F)
110%V of
nominal voltage
2. Specifications
Characteristics
Contact
Rating
Item
Contact material
Arrangement
Contact resistance (Initial)
Nominal switching capacity (resistive load)
Max. switching power (resistive load)
Max. switching voltage
Max. switching current
Min. switching capacity (reference value)*1
Insulation resistance (Initial)
Breakdown voltage Between open contacts
(Initial)
Between contact and coil
Electrical
characteristics
Mechanical
characteristics
Expected life
Temperature rise (coil)
Surge breakdown voltage*2
(Between contact and coil) (Initial)
Operate time (at nominal voltage) (at 20°C 68°F)
Release time (at nominal voltage) (at 20°C 68°F)
Shock resistance
Functional
Destructive
Functional
Vibration resistance
Destructive
Mechanical (at 180 times/min.)
Electrical (at 20 times/min.)
Conditions
Conditions for operation, transport and storage*3
Max. operating speed
Unit weight
Specifications
AgSnO2 type
1 Form A
Max. 100 mΩ (By voltage drop 6 V DC 1A)
20A 250V AC
5,000VA
250V AC
20A
100mA, 5V DC
Min. 100MΩ (at 500V DC) Measurement at same location as “Breakdown voltage” section.
1,000 Vrms for 1 min. (Detection current: 10 mA)
5,000 Vrms for 1 min. (Detection current: 10 mA)
Max. 55°C 131°F (By resistive method, nominal coil voltage applied to coil: 100%V,
contact carrying current: 20A, at 60°C 140°F)
10,000 V
Max. 20 ms (excluding contact bounce time.)
Max. 10 ms (excluding contact bounce time) (Without diode)
98 m/s2 (Half-wave pulse of sine wave: 11 ms; detection time: 10µs.)
980 m/s2 (Half-wave pulse of sine wave: 6 ms.)
10 to 55 Hz at double amplitude of 1.6 mm (Detection time: 10µs.)
10 to 55 Hz at double amplitude of 2 mm
Min. 106
Min. 105 (at nominal switching capacity)
Ambient temperature: –40°C to +60°C –40°F to +140°F,
Humidity: 5 to 85% R.H. (Not freezing and condensing at low temperature)
20 times/min. (at nominal switching capacity)
Slim TMP and Slim PCB: Approx. 28 g .99 oz
Flat TMP: Approx. 30 g 1.06 oz
Flat TM: Approx. 30 g 1.06 oz
* Specifications will vary with foreign standards certification ratings.
Notes: *1. This value can change due to the switching frequency, environmental conditions, and desired reliability level, therefore it is recommended to check this with the
actual load.
*2. Wave is standard shock voltage of ±1.2×50µs according to JEC-212-1981
*3. The upper limit of the ambient temperature is the maximum temperature that can satisfy the coil temperature rise value. Refer to Usage, transport and storage
conditions in NOTES.
3. Switching capacity
Resistive load
Electrical Life
Inductive load (cosφ = 0.7)
Note: Standard UL and CSA 1HP, 20A 250VAC 11/2HP, 20A 125VAC
20 A, 250 V AC
(cosφ = 1)
Inrush 70 A, Steady 20 A
(250 V AC cosφ = 0.7)
Inrush 80 A, Cut-off 80 A (When the motor is locked)
(250 V AC cosφ = 0.7)
105 (at 20 times/min.)
105 (at 20 times/min.)
1.5×103 (at 20 times/min.)
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB184E 201202-T