ERU5TBJ6R8 Datasheet, PDF (2/3 Pages) Panasonic Semiconductor – Wirewound Resistor with Ther mal Cut-offs

■ Dimensions in mm (not to scale)
13±1
9±1
Wirewound Resistor with Thermal Cut-offs
f0.8±0.1
f0.6±0.1
5^+–12
■ Fusing Characteristics
ERU5TBK5R1
1000
100
(Thermal Cutoff)
10
1
(Wirewound)
ERU5TBJ100
1000
100
1 3 10 30 100 300 1000
Applied Load (W)
(Thermal Cutoff)
10
1
(Wirewound)
1 3 10 30 100 300 1000
Applied Load (W)
ERU5TBK6R8
1000
100
(Thermal Cutoff)
10
1
(Wirewound)
ERU5TBJ150
1000
100
1 3 10 30 100 300 1000
Applied Load (W)
(Thermal Cutoff)
10
1
(Wirewound)
1 3 10 30 100 300 1000
Applied Load (W)
■ Packaging Methods
Please contact the factory for packaging methods.
Safety Precautions
The following are precautions for individual products. Please also refer to the precautions common to Fixed Resistors
shown on page ER3 of this catalog.
1. When voltage exceeds the rated voltage and/or a current exceeds the rated current and are continuously applied,
the element of Wirewound Resistor with Thermal Cutoffs (hereafter called the resistors) produces excessive heat,
which may not only deteriorate the built-in the Thermal Cutoffs but also blow it.
2. The resistors have a built-in the Thermal Cutoffs. Therefore, use and store them within their respective operating
and storing temperature ranges as specified in individual delivery specifications.
3. Carefully check the inductance effect of the resistors when using them in a high-frequency circuit.
4. If a transient load (heavy load in a short time) like a pulse is expected to be applied, check and evaluate the
operations of the resistors when installed in your products under the most adverse conditions before use.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2006