AYL111240 Datasheet, PDF (2/6 Pages) Panasonic Semiconductor – LED lighting connector

AYL11, 12
PRODUCT TYPES
1. Receptacle
Mated height
1.4mm
Part No.
AYL111240
Packing
Inner carton (1-reel)
5,000 pieces
2. Joint plug
Mated height
Part No.
Packing
Inner carton (1-reel)
1.4mm
AYL121240
5,000 pieces
Note: Order unit:
For volume production: 1-inner carton (1-reel) units
Samples for mounting check: Receptacle (AYL111240) 50 units, Joint plug (AYL121240) 25 units. Please contact our sales office.
Outer carton
10,000 pieces
Outer carton
10,000 pieces
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Electrical
characteristics
Breakdown voltage
Insulation resistance
Contact resistance
Composite insertion force
(initial)
Composite removal force
(initial)
1.0A/pin contact
125V AC/DC
Specifications
1,250V AC for 1 min.
Min. 1,000MΩ (initial)
Max. 90mΩ
Max. 25.2N
Min. 4.0N
Mechanical
characteristics
Floating distance
(Receptacle and joint plug
mated)
X direction: ±0.3 mm
Y direction: ±0.5 mm
Z direction: ±0.3 mm
Conditions
No short-circuiting or damage at a detection current of 1 mA
when the specified voltage is applied for one minute.
Using 500V DC megger (applied for 1 min.)
Based on the contact resistance measurement method
specified by JIS C 5402.
Two contacts of receptacle and a post of joint plug
Insertion force of two receptacles and a joint plug
Removal force of two receptacles and a joint plug
Y
X
Z
Ambient temperature
Storage temperature
–40°C to +105°C
–40°C to +85°C (product only)
–40°C to +50°C (packing structure)
Environmental
characteristics
Durability
Thermal shock resistance
(Receptacle and plug)
Humidity resistance
(Receptacle and plug)
Saltwater spray resistance
(Receptacle and plug)
H2S resistance
(Receptacle and plug)
200 cycles,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
500 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
24 hours,
insulation resistance min. 100MΩ,
contact resistance max. 90mΩ
48 hours,
contact resistance max. 90mΩ
3 times,
contact resistance max. 90mΩ
Soldering
temperature
resistance
Receptacle
The initial specification must be satisfied electrically
and mechanically
Solder paste thickness
The initial specification must be satisfied electrically
and mechanically
Note: The preceding show characteristics, when mated with receptacle and Joint plug.
No freezing at low temperatures. No dew condensation.
No freezing at low temperatures. No dew condensation.
Conformed to MIL-STD-202F, method 107G
Order
1
2
3
4
Temperature (°C)
–40−⁰³
105⁺³⁰
–40−⁰³
Time (minutes)
30
Max. 5
30
Max. 5
Bath temperature 85±2°C,
humidity 80 to 85% R.H.
Conformed to MIL-STD-1344A, method 1001
Bath temperature 35±2°C,
saltwater concentration 5±1%
Conformed to JEIDA-38-1984
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Using removal tool
Reflow soldering:
Max. peak temperature of 260°C, Max. 2 times
(PC board surface temperature near connector terminals)
Soldering iron: 300°C within 5 s
350°C within 3s
Recommendation t = 0.12 mm screen
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
ACCTB50E 201303-T