|
AYF330735 Datasheet, PDF (2/10 Pages) Panasonic Semiconductor – FPC connectors (0.3mm pitch) Back lock Y3B/Y3BW Series | |||
|
◁ |
AYF33
PRODUCT TYPES
Y3B
Height
Number of pins
7
8
9
11
13
15
17
21
23
0.9 mm
25
27
31
33
35
37
39
45
51
61
Part number
AYF330735
AYF330835
AYF330935
AYF331135
AYF331335
AYF331535
AYF331735
AYF332135
AYF332335
AYF332535
AYF332735
AYF333135
AYF333335
AYF333535
AYF333735
AYF333935
AYF334535
AYF335135
AYF336135
Inner carton
Packing
Outer carton
5,000 pieces
10,000 pieces
Y3BW
Height
Number of pins
Part number
Inner carton (1-reel)
11
AYF331165
0.9 mm
25
AYF332565
5,000 pieces
51
AYF335165
Notes: 1. Order unit; For volume production: 1-inner carton (1-reel) units.
Samples for mounting check: 50-connector units. Please contact our sales ofï¬ce.
Samples: Small lot orders are possible. Please contact our sales ofï¬ce.
2. Please contact our sales ofï¬ce for connectors having a number of pins other than those listed above.
Packing
Outer carton
10,000 pieces
SPECIFICATIONS
1. Characteristics
Item
Rated current
Rated voltage
Electrical
characteristics
Insulation resistance
Breakdown voltage
Contact resistance
Mechanical
characteristics
FPC holding force
Ambient temperature
Storage temperature
Thermal shock resistance
(with FPC mated)
Environmental
characteristics
Lifetime
characteristics
Unit weight
Humidity resistance
(with FPC mated)
Saltwater spray resistance
(with FPC mated)
H2S resistance
(with FPC mated)
Soldering heat resistance
Insertion and removal life
Speciï¬cations
0.2A/pin contact
50V AC/DC
Min. 1,000M⦠(initial)
150V AC for 1 min.
Max. 100mâ¦
Y3B: Min. 0.13N/pin contacts à pin contacts (initial)
Y3BW: Min. 0.13N/pin contacts à pin contacts +
1.00N (initial)
â55°C to +85°C
â55°C to +85°C (product only)
â40°C to +50°C (emboss packing)
5 cycles,
insulation resistance min. 100Mâ¦,
contact resistance max. 80mâ¦
120 hours,
insulation resistance min. 100Mâ¦,
contact resistance max. 100mâ¦
24 hours,
insulation resistance min. 100Mâ¦,
contact resistance max. 100mâ¦
48 hours,
contact resistance max. 100mâ¦
Peak temperature: 260°C or less
300°C within 5 sec. 350°C within 3 sec.
20 times
Y3B: 61 pin contact type: 0.10 g
Y3BW: 51 pin contact type: 0.09 g
Conditions
Using 250V DC megger (applied for 1 min.)
No short-circuiting or damage at a detection current of 1 mA
when the speciï¬ed voltage is applied for one minute.
Based on the contact resistance measurement method
speciï¬ed by JIS C 5402.
Measurement of the maximum force applied until the
inserted compatible FPC is pulled out in the insertion axis
direction while the connector lever is closed
No freezing at low temperatures. No dew condensation.
Conformed to MIL-STD-202F, method 107G
Order
1
2
3
4
Temperature (°C)
â55â03
85+30
â55â03
Time (minutes)
30
Max. 5
30
Max. 5
Bath temperature 40±2°C,
humidity 90 to 95% R.H.
Bath temperature 35±2°C,
saltwater concentration 5±1%
Bath temperature 40±2°C, gas concentration 3±1 ppm,
humidity 75 to 80% R.H.
Reï¬ow soldering
Soldering iron
Repeated insertion and removal: min. 10 sec./time
Panasonic Corporation Automation Controls Business Division industrial.panasonic.com/ac/e/
ACCTB47E 201303-T
|
▷ |