AN8497SA Datasheet, PDF (2/5 Pages) Panasonic Semiconductor – 3-channel linear input PWM driver IC

AN8497SA
ICs for Compact Disc/CD-ROM Player
s Pin Descriptions
Pin No. Symbol
Description
Pin No. Symbol
Description
1 VM12 Channel 1, 2 power supply
17 FB3 Channel 3 feedback signal output pin
2
FO1 Channel 1 forward output pin
18
CT Triangular wave output pin
3
RO1 Channel 1 reverse output pin
19 CLK CLK synchronous pulse input pin
4
SO1 Channel 1 feedback signal input pin 20 VPUMP Charge pump step-up voltage output
5 YC1A Channel 1 feedback gain adjustment pin A 21 BC2 Charge pump capacitor connection pin 2
6 YC1B Channel 1 feedback gain adjustment pin B 22 BC1 Charge pump capacitor connection pin 1
7 YC2A Channel 2 feedback gain adjustment pin A 23 N.C. N.C.
8 YC2B Channel 2 feedback gain adjustment pin B 24 RO3 Channel 3 reverse output pin
9
FB1 Channel 1 feedback signal output pin 25 VM3 Channel 3 power supply
10 In1 Channel 1 driver input pin
26 PG3 Channel 3 power ground
11 FB2 Channel 2 feedback signal output pin 27 FO3 Channel 3 forward output pin
12 In2 Channel 2 driver input pin
28
SB All shut off input pin
13 V_REF Reference voltage input pin
14 SGND Control circuit ground
29 SO2 Channel 2 feedback signal input pin
30 RO2 Channel 2 reverse output pin
15 In3 Channel 3 driver input pin
31 FO2 Channel 2 forward output pin
16 SV_DD Control circuit power supply
32 PG12 Channel 1, 2 power supply
s Absolute Maximum Ratings
Parameter
Symbol
Rating
Unit
Supply voltage ^*2
SV_DD
6.0
V
V_M12 , V_M3
Supply voltage application range
SV_DD
− 0.3 to +6.0
V
V_M12 , V_M3
Drive output voltage ^*7
V_(m)
7.0
V
Control signal input voltage ^*8
V_(n)
SGND to SV_DD
V
Supply current ^*3
I_SVDD
200
mA
I_VM12
2 000
I_VM3
1 200
Drive output current channel 1, 2 ^*5
I_(o)
±1 000
mA
Drive output current channel 3 ^*6
I_(p)
±1 200
mA
Power dissipation ^*4
P_D
400
mW
Operating ambient temperature ^*1
T_opr
−30 to +75
°C
Storage temperature ^*1
T_stg
−55 to +150
°C
Note) Do not apply external currents or voltages to any pins not specifically mentioned expect for the power supply and GND pins.
For circuit currents, '+' denotes current flowing into the IC, and '−' denotes current flowing out of the IC.
*1: Except for the operating ambient temperature and storage temperature, all ratings are for Ta = 25°C.
*2: The voltage in a step-up voltage circuit exceeds a supply voltage. Refer to "s Electrical Characteristics" for an allowable
value of a step-up voltage.
*3: Use within 1 000 mA in each channel 1 and channel 2.
2