PAN1323ETU Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – PAN1323ETU Triple Mode Simplifies the Development Environment

New
Int^NroP^edru^wocdtuiocnt
Product
Introduction
P
i
NEW! PAN1323ETU BLUETOOTH^® Development Module ^{Cut the Cable TM}
PAN1323ETU Triple Mode Simplifies the^BD^lue^eve^tolo^op^tm^he^-n^Mt^oE^dn^uvi^lr^eon^Pm^Ae^Nnt¹⁴⁵⁰
One development module, three standards: Bluetooth Classic,
Bluetooth Low Energy and ANT™ .
This unique triple mode ETU – that’s ETU for “Easy-To-Use” –
OUTLINES - ENW89803J
module plugs directly into Panasonic development kits, Texas
Instruments MSP430 and Stellaris experimenter boards with
the added benefit of header connectors that simplify prototype
wiring and field trials.
The PAN1323ETU is the development environment for the
PAN13xx family*. This family is based upon Texas Instrument’s
CC256x integrated circuits and uses a host controlled interface
The PAN1450 provides wireless interface per the BT 1.2
specification. Interoperability and BT compliance testing have
been completed for the BT Chip ZV4301 from Zeevo, Inc. to
facilate rapid time-to-market.
The BT Chip incorporates a widely popular 32-bit ARM7TDMI^TM
CPU core with sufficient bandwidth to support a wide range of
embedded µController applications and the module provides
full ARM7 software development access.
The PAN1450 is manufactured in a 13,4 x 18,7 x 2,2 mm³
SMD package and the only external component needed is an
50 ohm antenna.
Any customizations for the software can be handled
with our recommended partners.
(HCI), a cost effective and flexible means to implement a
Bluetooth network. HCI reduces BOM cost by eliminating
FEATURES
redundant processing capacity and giving designers the
Overview
- Inquiry results with RSSI (1.2)
flexibility to work with a controller of their choosing, as the
- Adaptive frequency hopping (AFH) enabled (1.2)
- High throughput (>600 kbps)
Bluetooth stack resides and executes on the application’s host
- Hold-, Park- and Sniffmode
- Up to 128 bit encryption
processor.
- Audio capability on an SCO channel
- Support for very low power modes - sleep and deep sleep
- All bluetooth data rates (up to 57,6/723,2Kbps)
Bluetooth Low Energy and ANT are ultra-low power network standards. The foundations of Bluetooth Low Energy
power
consumption
are
short
messages
and
establishing
very
fast
connections
(few ms). Using these ^{User Interfaces}
- Full-speed USB version 2.0 compliant
techniques,
energy
consumption
is
reduced
to
a
tenth
of
a
Classic
Bluetooth
network.
ANT
is
a wireless sensor network protocol ^{- Programmable baud rate UART (9,6 Kbps - 921,6 Kbps)}
- Debug UART (DUART)
operating
in
the
2.4
GHz
spectrum,
designed
for
ease
of
use,
efficiency
and
scalability, ANT supports peer-to - 16 General Purpose I/O‘s (interruptible)
- PCM audio (1 channel)
-peer,
star, tree and fixed mesh topologies.
- SPI and JTAG interface
Radio Features
OOTH ^QUAL
Product Performance:
PAN1323ETU Triple Mode Compatibility: - High sensitivity design (-86 dBm typ.)
- Integrated RF shield
B01839
- Class 2 module (0dBm typ. output power)
- One antenna port
PRODUCT
• The PAN1323ETU is the development tool for
Panasonic’s entire PAN13xx product line.*
• A single development module for three standards:
Series
Antenna Bluetooth LE ANT Compatibility
Design and Specifications are subject to change without notice. Ask the factory for technical specifications before purchase and/or use. If there is any doubt
regarding the safety of this product, kindly inform us immediately for technical consultation.
PAN1450 Rev. A
PAN1323ETU
X
X
XX
-
Bluetooth Classic, Bluetooth Low Energy and ANT. ^PAN1315
X
-- Bluetooth version 4.0
-- ANT is a wireless sensor network protocol
PAN1316
X
X
100%
designed for ultra-low power applications
PAN1317
X
X
-- Bluetooth Low Energy average power
consumption is about 1 uA.
PAN1325
X
X
• Cost effective and flexible HCI interface
PAN1326
X
X
X
• Easily integrates to Texas Instruments’ MSP430 and
100%
Stellaris ARM7 controllers
PAN1327
X
X
X
• Extraordinary range with 10 dbm of Tx power
PAN1323ETU Part Numbers:
Part Numbers
ENW-89825A2JF
Description
PAN1323ETU, Evaluation Module
* References in this document are restricted to TI CC256x based modules and do not include the PAN1321
www.panasonic.com/rfmodules
[e-mail]
1-800-344-2112
Copyright © 2011 Panasonic Corporation of North America.
All Rights Reserved. Specifications are subject to change without notice.
PAN1323ETUNPI, FY11-042-XXX